English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الجدار والسقف للغرفة النظيفة
لوحة جدار غرف الأبحاث المغلفة بمضادات البكتيريا
A rock-wool cleanroom wall panel finished with an antibacterial powder or coil coating, designed to complement routine cleaning by reducing bacterial survival on frequently touched, non-porous wall surfaces.
- Antibacterial Surface Coating
- ISO 22196 Test Method
- Rock Wool Insulated Core
- Sealed Hygienic Joints
مقدمة المنتج
Antibacterial-Coated Cleanroom Wall Panels apply a tested antimicrobial surface system to smooth metal facings over a closed rock wool core. The coating is intended to reduce bacterial survival on the wall between cleaning cycles; it does not replace disinfection or environmental monitoring. Continuous facings, protected edges and flush sealed joints prevent the inner mineral insulation from contacting the room. The panel is most useful in life-science and healthcare areas with frequent hand contact, trolley movement or repeated cleaning, where surface hygiene and coating durability must work together.
الخصائص الرئيسية
Surface activity can be evaluated using ISO 22196 or JIS Z 2801 against defined bacterial strains.
Smooth non-porous facings remain compatible with established cleaning procedures.
Rock wool insulation stays fully enclosed behind the functional coating and steel substrate.
Replaceable modules allow a locally damaged surface to be renewed without rebuilding the entire wall.
مخاوف المنتج للعملاء
Customers need to distinguish tested antibacterial activity from ordinary paint and preserve that activity through correct cleaning.
Generic hygienic paint is sometimes marketed as antibacterial without a recognized surface test.The coating system is identified with an ISO 22196 or JIS Z 2801 test method and defined test organism.
Abrasive scrubbing can wear through the functional surface layer.Compatible non-abrasive tools and cleaners preserve coating thickness during routine maintenance.
Customers may assume an antibacterial wall eliminates scheduled disinfection.The panel is presented as a hygiene-supporting surface that works alongside the normal cleaning program.
Damaged joints can harbor residue even when the main surface remains active.Flush connections and intact hygienic sealant remove crevices that the coating cannot protect.
تطبيقات نموذجية
Hospital sterile support roomsPharmaceutical changing and preparation areasMedical-device assembly roomsمختبرات التكنولوجيا الحيويةFood and healthcare clean corridors
المعلمات الفنية
Common construction specifications for antibacterial-coated cleanroom panels are listed below.
| المواد الأساسية | Hydrophobic rock wool |
|---|---|
| سمك اللوحة | 50, 75 or 100 mm |
| العرض الفعال | 950 or 1150 mm |
| الحد الأقصى الطول | 6000 mm |
| الصلب يواجه سمك | 0.50–0.60 mm |
| الكثافة الأساسية | 100–140 kg/m³ |
| الموصلية الحرارية | 0.039–0.043 W/(m·K) |
| إنهاء السطح | Antibacterial powder or coil coating tested using ISO 22196 / JIS Z 2801 |
| نوع المشترك | Flush tongue-and-groove joint with antibacterial-compatible sealant |
| التخصيص | متاح بناءً على التطبيق المقصود وبيئة التشغيل |
الخيارات المتاحة
Powder-coated or coil-coated surfaceAlternative cleanroom colorsStainless steel reverse faceRock wool density selection
Planning a Antibacterial-Coated Cleanroom Wall Panel specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
