Complete antibacterial-coated cleanroom wall panel with mineral core

クリーンルームの壁と天井システム

抗菌コーティングされたクリーンルームの壁パネル

A rock-wool cleanroom wall panel finished with an antibacterial powder or coil coating, designed to complement routine cleaning by reducing bacterial survival on frequently touched, non-porous wall surfaces.

Antibacterial Surface Coating
ISO 22196 Test Method
Rock Wool Insulated Core
Sealed Hygienic Joints

見積もりリクエスト製品案内

商品紹介

Antibacterial-Coated Cleanroom Wall Panels apply a tested antimicrobial surface system to smooth metal facings over a closed rock wool core. The coating is intended to reduce bacterial survival on the wall between cleaning cycles; it does not replace disinfection or environmental monitoring. Continuous facings, protected edges and flush sealed joints prevent the inner mineral insulation from contacting the room. The panel is most useful in life-science and healthcare areas with frequent hand contact, trolley movement or repeated cleaning, where surface hygiene and coating durability must work together.

主要な特徴

Antibacterial additives are incorporated into the exposed coating rather than applied as a temporary wipe-on treatment.

Surface activity can be evaluated using ISO 22196 or JIS Z 2801 against defined bacterial strains.

Smooth non-porous facings remain compatible with established cleaning procedures.

Rock wool insulation stays fully enclosed behind the functional coating and steel substrate.

Replaceable modules allow a locally damaged surface to be renewed without rebuilding the entire wall.

お客様の製品に関する懸念事項

Customers need to distinguish tested antibacterial activity from ordinary paint and preserve that activity through correct cleaning.

Generic hygienic paint is sometimes marketed as antibacterial without a recognized surface test.The coating system is identified with an ISO 22196 or JIS Z 2801 test method and defined test organism.

Abrasive scrubbing can wear through the functional surface layer.Compatible non-abrasive tools and cleaners preserve coating thickness during routine maintenance.

Customers may assume an antibacterial wall eliminates scheduled disinfection.The panel is presented as a hygiene-supporting surface that works alongside the normal cleaning program.

Damaged joints can harbor residue even when the main surface remains active.Flush connections and intact hygienic sealant remove crevices that the coating cannot protect.

典型的な用途

Hospital sterile support roomsPharmaceutical changing and preparation areasMedical-device assembly roomsBiotechnology laboratoriesFood and healthcare clean corridors

技術的なパラメータ

Common construction specifications for antibacterial-coated cleanroom panels are listed below.

コア材料	Hydrophobic rock wool
パネルの厚さ	50 、 75 または 100 の mm
有効幅	950 または 1150 mm
最大長さ	6000 mm
鋼鉄の厚さを直面する	0.50 — 0.60 mm
コア密度	100–140 kg/m³
熱伝導率	0.039–0.043 W/(m·K)
表面仕上げ	Antibacterial powder or coil coating tested using ISO 22196 / JIS Z 2801
ジョイントタイプ	Flush tongue-and-groove joint with antibacterial-compatible sealant
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

Powder-coated or coil-coated surfaceAlternative cleanroom colorsStainless steel reverse faceRock wool density selection

Planning a Antibacterial-Coated Cleanroom Wall Panel specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する