Complete antibacterial-coated cleanroom wall panel with mineral core

Dinding bilik bersih dan sistem siling

Panel dinding bilik bersih bersalut antibakteria

A rock-wool cleanroom wall panel finished with an antibacterial powder or coil coating, designed to complement routine cleaning by reducing bacterial survival on frequently touched, non-porous wall surfaces.

Antibacterial Surface Coating
ISO 22196 Test Method
Rock Wool Insulated Core
Sealed Hygienic Joints

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Antibacterial-Coated Cleanroom Wall Panels apply a tested antimicrobial surface system to smooth metal facings over a closed rock wool core. The coating is intended to reduce bacterial survival on the wall between cleaning cycles; it does not replace disinfection or environmental monitoring. Continuous facings, protected edges and flush sealed joints prevent the inner mineral insulation from contacting the room. The panel is most useful in life-science and healthcare areas with frequent hand contact, trolley movement or repeated cleaning, where surface hygiene and coating durability must work together.

Ciri-ciri Utama

Antibacterial additives are incorporated into the exposed coating rather than applied as a temporary wipe-on treatment.

Surface activity can be evaluated using ISO 22196 or JIS Z 2801 against defined bacterial strains.

Smooth non-porous facings remain compatible with established cleaning procedures.

Rock wool insulation stays fully enclosed behind the functional coating and steel substrate.

Replaceable modules allow a locally damaged surface to be renewed without rebuilding the entire wall.

Kebimbangan Produk Pelanggan

Customers need to distinguish tested antibacterial activity from ordinary paint and preserve that activity through correct cleaning.

Generic hygienic paint is sometimes marketed as antibacterial without a recognized surface test.The coating system is identified with an ISO 22196 or JIS Z 2801 test method and defined test organism.

Abrasive scrubbing can wear through the functional surface layer.Compatible non-abrasive tools and cleaners preserve coating thickness during routine maintenance.

Customers may assume an antibacterial wall eliminates scheduled disinfection.The panel is presented as a hygiene-supporting surface that works alongside the normal cleaning program.

Damaged joints can harbor residue even when the main surface remains active.Flush connections and intact hygienic sealant remove crevices that the coating cannot protect.

Permohonan yang biasa

Hospital sterile support roomsPharmaceutical changing and preparation areasMedical-device assembly roomsBiotechnology laboratoriesFood and healthcare clean corridors

Parameter teknikal

Common construction specifications for antibacterial-coated cleanroom panels are listed below.

Bahan Teras	Hydrophobic rock wool
Ketebalan Panel	50, 75 or 100 mm
Lebar berkesan	950 atau 1150 mm
Panjang maksimum	6000 mm
Keluli Menghadapi Ketebalan	0.50–0.60 mm
Ketumpatan teras	100–140 kg/m³
Kekonduksian Terma	0.039–0.043 W/(m·K)
Kemasan permukaan	Antibacterial powder or coil coating tested using ISO 22196 / JIS Z 2801
Jenis Bersatu	Flush tongue-and-groove joint with antibacterial-compatible sealant
Penyesuaian	Terdapat berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi

Pilihan yang boleh didapati

Powder-coated or coil-coated surfaceAlternative cleanroom colorsStainless steel reverse faceRock wool density selection

Planning a Antibacterial-Coated Cleanroom Wall Panel specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami