Complete antibacterial-coated cleanroom wall panel with mineral core

클린룸 벽 및 천장 시스템

Antibacterial - Coated Cleanroom Wall Panel (클린룸 벽판)

A rock-wool cleanroom wall panel finished with an antibacterial powder or coil coating, designed to complement routine cleaning by reducing bacterial survival on frequently touched, non-porous wall surfaces.

Antibacterial Surface Coating
ISO 22196 Test Method
Rock Wool Insulated Core
Sealed Hygienic Joints

견적 요청 제품 찾아보기

상품 소개

Antibacterial-Coated Cleanroom Wall Panels apply a tested antimicrobial surface system to smooth metal facings over a closed rock wool core. The coating is intended to reduce bacterial survival on the wall between cleaning cycles; it does not replace disinfection or environmental monitoring. Continuous facings, protected edges and flush sealed joints prevent the inner mineral insulation from contacting the room. The panel is most useful in life-science and healthcare areas with frequent hand contact, trolley movement or repeated cleaning, where surface hygiene and coating durability must work together.

주요 기능

Antibacterial additives are incorporated into the exposed coating rather than applied as a temporary wipe-on treatment.

Surface activity can be evaluated using ISO 22196 or JIS Z 2801 against defined bacterial strains.

Smooth non-porous facings remain compatible with established cleaning procedures.

Rock wool insulation stays fully enclosed behind the functional coating and steel substrate.

Replaceable modules allow a locally damaged surface to be renewed without rebuilding the entire wall.

고객 제품 관심사

Customers need to distinguish tested antibacterial activity from ordinary paint and preserve that activity through correct cleaning.

Generic hygienic paint is sometimes marketed as antibacterial without a recognized surface test.The coating system is identified with an ISO 22196 or JIS Z 2801 test method and defined test organism.

Abrasive scrubbing can wear through the functional surface layer.Compatible non-abrasive tools and cleaners preserve coating thickness during routine maintenance.

Customers may assume an antibacterial wall eliminates scheduled disinfection.The panel is presented as a hygiene-supporting surface that works alongside the normal cleaning program.

Damaged joints can harbor residue even when the main surface remains active.Flush connections and intact hygienic sealant remove crevices that the coating cannot protect.

일반적인 응용 프로그램

Hospital sterile support roomsPharmaceutical changing and preparation areasMedical-device assembly rooms생명공학 연구소 (Biotechnology Laboratories)Food and healthcare clean corridors

기술 매개변수

Common construction specifications for antibacterial-coated cleanroom panels are listed below.

핵심 재료	Hydrophobic rock wool
패널 두께	50, 75 또는 100 mm
유효 폭	950 또는 1150 mm
최대 길이	6000 mm
강철 면면 두께	0. 50 - 0. 60 mm
코어 밀도	100 - 140 kg / m 3
열전도도 (Thermal Conductivity)	0. 039 - 0. 043 W / (m · K)
표면 마무리	Antibacterial powder or coil coating tested using ISO 22196 / JIS Z 2801
접합 유형	Flush tongue-and-groove joint with antibacterial-compatible sealant
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Powder-coated or coil-coated surfaceAlternative cleanroom colorsStainless steel reverse faceRock wool density selection

Planning a Antibacterial-Coated Cleanroom Wall Panel specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.