Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Sistem Dinding dan Langit-langit Cleanroom
Panel Dinding Cleanroom yang Dilapisi Antibakteri
A rock-wool cleanroom wall panel finished with an antibacterial powder or coil coating, designed to complement routine cleaning by reducing bacterial survival on frequently touched, non-porous wall surfaces.
- Antibacterial Surface Coating
- ISO 22196 Test Method
- Rock Wool Insulated Core
- Sealed Hygienic Joints
Perkenalan produk
Antibacterial-Coated Cleanroom Wall Panels apply a tested antimicrobial surface system to smooth metal facings over a closed rock wool core. The coating is intended to reduce bacterial survival on the wall between cleaning cycles; it does not replace disinfection or environmental monitoring. Continuous facings, protected edges and flush sealed joints prevent the inner mineral insulation from contacting the room. The panel is most useful in life-science and healthcare areas with frequent hand contact, trolley movement or repeated cleaning, where surface hygiene and coating durability must work together.
Fitur utama:
Surface activity can be evaluated using ISO 22196 or JIS Z 2801 against defined bacterial strains.
Smooth non-porous facings remain compatible with established cleaning procedures.
Rock wool insulation stays fully enclosed behind the functional coating and steel substrate.
Replaceable modules allow a locally damaged surface to be renewed without rebuilding the entire wall.
Kekhawatiran produk pelanggan
Customers need to distinguish tested antibacterial activity from ordinary paint and preserve that activity through correct cleaning.
Generic hygienic paint is sometimes marketed as antibacterial without a recognized surface test.The coating system is identified with an ISO 22196 or JIS Z 2801 test method and defined test organism.
Abrasive scrubbing can wear through the functional surface layer.Compatible non-abrasive tools and cleaners preserve coating thickness during routine maintenance.
Customers may assume an antibacterial wall eliminates scheduled disinfection.The panel is presented as a hygiene-supporting surface that works alongside the normal cleaning program.
Damaged joints can harbor residue even when the main surface remains active.Flush connections and intact hygienic sealant remove crevices that the coating cannot protect.
Aplikasi yang Tipis
Hospital sterile support roomsPharmaceutical changing and preparation areasRuang perakitan peralatan medisLaboratorium BioteknologiFood and healthcare clean corridors
Parameter teknis
Common construction specifications for antibacterial-coated cleanroom panels are listed below.
| Bahan inti | Hydrophobic rock wool |
|---|---|
| Ketebalan Panel (Panel Thickness) | 50, 75 atau 100 mm |
| Efektif lebar | 950 atau 1150 mm |
| Panjang maksimum | 6000 mm ZXQ000003 |
| Baja menghadap ketebalan | 0,50 - 0,60 mm |
| Kepadatan inti (core density) | 100–140 kg/m³ |
| Konduktivitas Termal (Thermal Conductivity) | 0.039–0.043 W/(m·K) |
| Permukaan selesai | Antibacterial powder or coil coating tested using ISO 22196 / JIS Z 2801 |
| Jenis Bersama | Flush tongue-and-groove joint with antibacterial-compatible sealant |
| Customization (Kustomisasi) | A Tersedia berdasarkan aplikasi dan lingkungan operasi yang dimaksudkan |
Pilihan yang tersedia
Powder-coated or coil-coated surfaceAlternative cleanroom colorsStainless steel reverse faceRock wool density selection
Planning a Antibacterial-Coated Cleanroom Wall Panel specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
