Complete antibacterial-coated cleanroom wall panel with mineral core

Temiz Oda Duvar ve Tavan Sistemleri

Antibakteriyel kaplı temiz oda duvar paneli

A rock-wool cleanroom wall panel finished with an antibacterial powder or coil coating, designed to complement routine cleaning by reducing bacterial survival on frequently touched, non-porous wall surfaces.

Antibacterial Surface Coating
ISO 22196 Test Method
Rock Wool Insulated Core
Sealed Hygienic Joints

Alıntı isteği Browse ürünleri

Ürün tanıtımı

Antibacterial-Coated Cleanroom Wall Panels apply a tested antimicrobial surface system to smooth metal facings over a closed rock wool core. The coating is intended to reduce bacterial survival on the wall between cleaning cycles; it does not replace disinfection or environmental monitoring. Continuous facings, protected edges and flush sealed joints prevent the inner mineral insulation from contacting the room. The panel is most useful in life-science and healthcare areas with frequent hand contact, trolley movement or repeated cleaning, where surface hygiene and coating durability must work together.

Ana Özellikler

Antibacterial additives are incorporated into the exposed coating rather than applied as a temporary wipe-on treatment.

Surface activity can be evaluated using ISO 22196 or JIS Z 2801 against defined bacterial strains.

Smooth non-porous facings remain compatible with established cleaning procedures.

Rock wool insulation stays fully enclosed behind the functional coating and steel substrate.

Replaceable modules allow a locally damaged surface to be renewed without rebuilding the entire wall.

Müşteri Ürün Sorunları

Customers need to distinguish tested antibacterial activity from ordinary paint and preserve that activity through correct cleaning.

Generic hygienic paint is sometimes marketed as antibacterial without a recognized surface test.The coating system is identified with an ISO 22196 or JIS Z 2801 test method and defined test organism.

Abrasive scrubbing can wear through the functional surface layer.Compatible non-abrasive tools and cleaners preserve coating thickness during routine maintenance.

Customers may assume an antibacterial wall eliminates scheduled disinfection.The panel is presented as a hygiene-supporting surface that works alongside the normal cleaning program.

Damaged joints can harbor residue even when the main surface remains active.Flush connections and intact hygienic sealant remove crevices that the coating cannot protect.

Tipik uygulamalar

Hospital sterile support roomsPharmaceutical changing and preparation areasMedical-device assembly roomsBiyoteknoloji LaboratuvarlarıFood and healthcare clean corridors

Teknik parametreler

Common construction specifications for antibacterial-coated cleanroom panels are listed below.

Temel malzemeler	Hydrophobic rock wool
Panel kalınlığı	50, 75 or 100 mm
Effective Width (Etkili Genişlik)	950 or 1150 mm
Maksimum uzunluk	6000 mm
Çelik yüz yüze kalınlığı	0.50–0.60 mm
Core Density (Çekirdek Yoğunluğu)	100–140 kg/m³
Termal İletkenlik	0.039–0.043 W/(m·K)
Yüzey bitirme	Antibacterial powder or coil coating tested using ISO 22196 / JIS Z 2801
Ortak tip	Flush tongue-and-groove joint with antibacterial-compatible sealant
Customization (Özelleşme)	Kullanılan amaçlanan uygulama ve çalışma ortamına göre kullanılabilir

Mevcut Seçenekler

Powder-coated or coil-coated surfaceAlternative cleanroom colorsStainless steel reverse faceRock wool density selection

Planning a Antibacterial-Coated Cleanroom Wall Panel specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun