English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
مرشحات الهواء والترشيح الكيميائي
مرشح إزالة الأمونيا
A targeted gas-phase filter loaded with acid-impregnated pellets that convert ammonia into a retained, non-volatile form within the media bed.
- NH3-Targeted Chemistry
- Low-Dust Pellets
- Uniform Packed Bed
- Laboratory Air Control
مقدمة المنتج
The ammonia removal filter uses porous carbon or alumina carrying an acidic impregnant chosen to neutralize NH3. The media is contained in a corrosion-resistant box or refillable cartridge with a uniform depth across the airflow path. This dedicated chemistry provides more reliable ammonia capacity than untreated carbon and helps protect staff areas, animals, process materials and downstream HVAC components. A particle prefilter should be installed upstream to keep the reactive surface accessible.
الخصائص الرئيسية
Even media packing supports consistent residence time across the entire face.
Corrosion-resistant mesh and casing tolerate the intended basic-gas environment.
Serviceable cell formats simplify staged replacement after media-capacity monitoring.
مخاوف المنتج للعملاء
Ammonia has a low molecular weight and weak affinity for untreated carbon, so a general odour filter may fail without warning.
Untreated carbon releases ammonia again as conditions change.Acid impregnation converts captured NH3 into a more strongly retained salt.
Odour is noticed before a planned maintenance interval ends.A deeper bed and scheduled media-capacity checks provide a more predictable replacement point.
Filter housing components corrode in a persistent ammonia atmosphere.Stainless steel or coated metal construction isolates the media and resists surface attack.
Adsorbent fines escape from a vibrating air-handling unit.Fine outlet screens and compressed media retain pellets and dust inside the cartridge.
تطبيقات نموذجية
Animal holding roomsChemical analysis laboratoriesFertilizer production support areasAmmonia refrigeration plant roomsWastewater treatment ventilation
المعلمات الفنية
Representative material and size ranges for an ammonia-specific gas filter are shown below.
| المواد الأساسية | Acid-impregnated activated carbon or activated alumina formulated for NH3 capture |
|---|---|
| سمك اللوحة | 100–292 mm overall cartridge or box-cell depth |
| العرض الفعال | 145–610 mm nominal module width |
| الحد الأقصى الطول | Up to 610 mm nominal module height |
| الصلب يواجه سمك | 0.8–1.2 mm galvanized, coated or 304 stainless steel |
| الكثافة الأساسية | 500–700 kg/m³ packed selective-media bulk density |
| الموصلية الحرارية | 0.10–0.22 W/(m·K) for the packed reactive media |
| إنهاء السطح | Brushed stainless steel or chemical-resistant white powder coat |
| نوع المشترك | Sealed cassette with retained pellet bed and continuous perimeter gasket |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Box cell or cylindrical canisterAcid-treated carbon or aluminaStainless-steel constructionLow-dust downstream scrim
Planning a Ammonia Removal Filter specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
