Three-quarter view of ammonia removal filter with green selective pellets

Hava filtreleri ve kimyasal filtrasyon

Amonyak Kaldırma Filtresi

A targeted gas-phase filter loaded with acid-impregnated pellets that convert ammonia into a retained, non-volatile form within the media bed.

NH3-Targeted Chemistry
Low-Dust Pellets
Uniform Packed Bed
Laboratory Air Control

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The ammonia removal filter uses porous carbon or alumina carrying an acidic impregnant chosen to neutralize NH3. The media is contained in a corrosion-resistant box or refillable cartridge with a uniform depth across the airflow path. This dedicated chemistry provides more reliable ammonia capacity than untreated carbon and helps protect staff areas, animals, process materials and downstream HVAC components. A particle prefilter should be installed upstream to keep the reactive surface accessible.

Ana Özellikler

Acid-impregnated granules chemically retain ammonia instead of relying only on weak physical adsorption.

Even media packing supports consistent residence time across the entire face.

Corrosion-resistant mesh and casing tolerate the intended basic-gas environment.

Serviceable cell formats simplify staged replacement after media-capacity monitoring.

Müşteri Ürün Sorunları

Ammonia has a low molecular weight and weak affinity for untreated carbon, so a general odour filter may fail without warning.

Untreated carbon releases ammonia again as conditions change.Acid impregnation converts captured NH3 into a more strongly retained salt.

Odour is noticed before a planned maintenance interval ends.A deeper bed and scheduled media-capacity checks provide a more predictable replacement point.

Filter housing components corrode in a persistent ammonia atmosphere.Stainless steel or coated metal construction isolates the media and resists surface attack.

Adsorbent fines escape from a vibrating air-handling unit.Fine outlet screens and compressed media retain pellets and dust inside the cartridge.

Tipik uygulamalar

Animal holding roomsChemical analysis laboratoriesFertilizer production support areasAmmonia refrigeration plant roomsWastewater treatment ventilation

Teknik parametreler

Representative material and size ranges for an ammonia-specific gas filter are shown below.

Temel malzemeler	Acid-impregnated activated carbon or activated alumina formulated for NH3 capture
Panel kalınlığı	100–292 mm overall cartridge or box-cell depth
Effective Width (Etkili Genişlik)	145–610 mm nominal module width
Maksimum uzunluk	Up to 610 mm nominal module height
Çelik yüz yüze kalınlığı	0.8–1.2 mm galvanized, coated or 304 stainless steel
Core Density (Çekirdek Yoğunluğu)	500–700 kg/m³ packed selective-media bulk density
Termal İletkenlik	0.10–0.22 W/(m·K) for the packed reactive media
Yüzey bitirme	Brushed stainless steel or chemical-resistant white powder coat
Ortak tip	Sealed cassette with retained pellet bed and continuous perimeter gasket
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Box cell or cylindrical canisterAcid-treated carbon or aluminaStainless-steel constructionLow-dust downstream scrim

Planning a Ammonia Removal Filter specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun