Three-quarter view of ammonia removal filter with green selective pellets

エアフィルターと化学ろ過

アンモニア除去フィルター

A targeted gas-phase filter loaded with acid-impregnated pellets that convert ammonia into a retained, non-volatile form within the media bed.

NH3-Targeted Chemistry
Low-Dust Pellets
Uniform Packed Bed
Laboratory Air Control

見積もりリクエスト製品案内

商品紹介

The ammonia removal filter uses porous carbon or alumina carrying an acidic impregnant chosen to neutralize NH3. The media is contained in a corrosion-resistant box or refillable cartridge with a uniform depth across the airflow path. This dedicated chemistry provides more reliable ammonia capacity than untreated carbon and helps protect staff areas, animals, process materials and downstream HVAC components. A particle prefilter should be installed upstream to keep the reactive surface accessible.

主要な特徴

Acid-impregnated granules chemically retain ammonia instead of relying only on weak physical adsorption.

Even media packing supports consistent residence time across the entire face.

Corrosion-resistant mesh and casing tolerate the intended basic-gas environment.

Serviceable cell formats simplify staged replacement after media-capacity monitoring.

お客様の製品に関する懸念事項

Ammonia has a low molecular weight and weak affinity for untreated carbon, so a general odour filter may fail without warning.

Untreated carbon releases ammonia again as conditions change.Acid impregnation converts captured NH3 into a more strongly retained salt.

Odour is noticed before a planned maintenance interval ends.A deeper bed and scheduled media-capacity checks provide a more predictable replacement point.

Filter housing components corrode in a persistent ammonia atmosphere.Stainless steel or coated metal construction isolates the media and resists surface attack.

Adsorbent fines escape from a vibrating air-handling unit.Fine outlet screens and compressed media retain pellets and dust inside the cartridge.

典型的な用途

Animal holding roomsChemical analysis laboratoriesFertilizer production support areasAmmonia refrigeration plant roomsWastewater treatment ventilation

技術的なパラメータ

Representative material and size ranges for an ammonia-specific gas filter are shown below.

コア材料	Acid-impregnated activated carbon or activated alumina formulated for NH3 capture
パネルの厚さ	100–292 mm overall cartridge or box-cell depth
有効幅	145–610 mm nominal module width
最大長さ	Up to 610 mm nominal module height
鋼鉄の厚さを直面する	0.8–1.2 mm galvanized, coated or 304 stainless steel
コア密度	500–700 kg/m³ packed selective-media bulk density
熱伝導率	0.10–0.22 W/(m·K) for the packed reactive media
表面仕上げ	Brushed stainless steel or chemical-resistant white powder coat
ジョイントタイプ	Sealed cassette with retained pellet bed and continuous perimeter gasket
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Box cell or cylindrical canisterAcid-treated carbon or aluminaStainless-steel constructionLow-dust downstream scrim

Planning a Ammonia Removal Filter specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する