English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
FFU ومعدات تنقية الهواء الطرفية
AMC فلتر الكيميائية FFU
A two-stage fan filter unit that combines target-specific molecular adsorbent media with downstream HEPA or ULPA filtration for contamination-sensitive processes.
- Targeted AMC Adsorbents
- Two-Stage Filtration
- انخفاض انبعاثات البناء
- Replaceable Media Cassettes
مقدمة المنتج
The AMC chemical filter FFU is built around a removable molecular panel installed upstream of a particulate final filter. Activated carbon captures volatile organic compounds, impregnated carbon targets acidic species and ion-exchange media can be selected for alkaline contaminants such as ammonia. The downstream HEPA or ULPA stage retains particles released by the incoming air stream and protects the clean zone after the adsorption section. A deeper EC fan plenum provides the additional pressure needed for both stages without forcing a separate chemical-filter bank into the ceiling return path.
الخصائص الرئيسية
The molecular panel sits upstream of the particulate filter so captured gases do not bypass the final clean-air face.
Low-outgassing frame, gasket and sealant materials reduce secondary contamination inside sensitive clean zones.
Separate cassette access permits the chemical stage to be changed according to its own service life.
مخاوف المنتج للعملاء
Particle counts alone do not reveal molecular contaminants that can corrode conductors, change photoresist chemistry or deposit films on precision surfaces.
Trace ammonia or acidic gases can shift sensitive process chemistry even when the cleanroom particle count is acceptable.A selected base- or acid-targeted adsorbent layer removes the relevant molecular species before supply air reaches the process.
One general-purpose carbon bed performs poorly when the contaminant mixture contains dissimilar compounds.Multiple embedded media types can be arranged in the same cassette for defined acids, bases and organic vapours.
Chemical media can shed particles or emit compounds that burden a downstream process zone.Cleanroom-grade low-shedding media is followed by a HEPA or ULPA panel that captures particulate carryover.
Replacing both filter stages together wastes usable particulate-filter life.Independent molecular and final-filter access allows each stage to follow its own pressure-drop or exposure schedule.
تطبيقات نموذجية
Photolithography and coating areasSemiconductor metrology roomsReticle and wafer storageFlat-panel display processingBattery material dry rooms
المعلمات الفنية
Typical material and dimensional ranges for an AMC chemical filter FFU are shown below.
| المواد الأساسية | Activated carbon, impregnated carbon or ion-exchange adsorbent panel upstream of a micro-glass HEPA or ULPA pack |
|---|---|
| سمك اللوحة | 400-620 mm overall module depth, depending on molecular media depth |
| العرض الفعال | 575-1175 mm nominal ceiling-grid width |
| الحد الأقصى الطول | Up to 1220 mm standard module length |
| الصلب يواجه سمك | 1.0-1.5 mm powder-coated or stainless-steel plenum sheet |
| الكثافة الأساسية | Approximately 350-550 kg/m³ bulk density for selected granular or embedded adsorbent media |
| الموصلية الحرارية | Approximately 0.08-0.20 W/(m·K) for the selected dry carbon-based adsorption layer |
| إنهاء السطح | Low-outgassing white powder coat or brushed 304 stainless steel |
| نوع المشترك | Gasketed removable AMC cassette with downstream gel-seal or compression-seal particulate filter |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Acid, base, VOC or combined adsorbent blendHEPA H14 or ULPA U15-U16 final stageGas sampling portsDifferential-pressure monitoring for both stages
Planning a AMC Chemical Filter FFU specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
