Nhà cung cấp một cửa của bạn cho thiết bị phòng sạch và thiết bị vô trùng cơ sở thiết yếuHỗ trợ dự án quốc tế
Open mobile navigationClose mobile navigation
Thiết bị lọc không khí FFU và thiết bị đầu cuối

Bộ lọc hóa học AMC FFU

A two-stage fan filter unit that combines target-specific molecular adsorbent media with downstream HEPA or ULPA filtration for contamination-sensitive processes.
  • Targeted AMC Adsorbents
  • Two-Stage Filtration
  • Xây dựng khí thải thấp
  • Replaceable Media Cassettes
Yêu cầu báo giá Duyệt các sản phẩm

Giới thiệu Sản phẩm

The AMC chemical filter FFU is built around a removable molecular panel installed upstream of a particulate final filter. Activated carbon captures volatile organic compounds, impregnated carbon targets acidic species and ion-exchange media can be selected for alkaline contaminants such as ammonia. The downstream HEPA or ULPA stage retains particles released by the incoming air stream and protects the clean zone after the adsorption section. A deeper EC fan plenum provides the additional pressure needed for both stages without forcing a separate chemical-filter bank into the ceiling return path.

Các tính năng chính

Adsorbent selection can be matched to acids, bases, VOCs, dopants or a defined multi-contaminant blend.

The molecular panel sits upstream of the particulate filter so captured gases do not bypass the final clean-air face.

Low-outgassing frame, gasket and sealant materials reduce secondary contamination inside sensitive clean zones.

Separate cassette access permits the chemical stage to be changed according to its own service life.

Các mối quan tâm về sản phẩm của khách hàng

Particle counts alone do not reveal molecular contaminants that can corrode conductors, change photoresist chemistry or deposit films on precision surfaces.

Trace ammonia or acidic gases can shift sensitive process chemistry even when the cleanroom particle count is acceptable.A selected base- or acid-targeted adsorbent layer removes the relevant molecular species before supply air reaches the process.
One general-purpose carbon bed performs poorly when the contaminant mixture contains dissimilar compounds.Multiple embedded media types can be arranged in the same cassette for defined acids, bases and organic vapours.
Chemical media can shed particles or emit compounds that burden a downstream process zone.Cleanroom-grade low-shedding media is followed by a HEPA or ULPA panel that captures particulate carryover.
Replacing both filter stages together wastes usable particulate-filter life.Independent molecular and final-filter access allows each stage to follow its own pressure-drop or exposure schedule.

Các ứng dụng điển hình

Photolithography and coating areasSemiconductor metrology roomsReticle and wafer storageFlat-panel display processingBattery material dry rooms

Thông số kỹ thuật

Typical material and dimensional ranges for an AMC chemical filter FFU are shown below.

Vật liệu lõiActivated carbon, impregnated carbon or ion-exchange adsorbent panel upstream of a micro-glass HEPA or ULPA pack
Độ dày bảng điều khiển400-620 mm overall module depth, depending on molecular media depth
Chiều rộng hiệu quả575-1175 mm nominal ceiling-grid width
Chiều dài tối đaUp to 1220 mm standard module length
Thép đối mặt với độ dày1.0-1.5 mm powder-coated or stainless-steel plenum sheet
Mật độ lõiApproximately 350-550 kg/m³ bulk density for selected granular or embedded adsorbent media
Độ dẫn nhiệtApproximately 0.08-0.20 W/(m·K) for the selected dry carbon-based adsorption layer
Kết thúc bề mặtLow-outgassing white powder coat or brushed 304 stainless steel
Loại khớp nốiGasketed removable AMC cassette with downstream gel-seal or compression-seal particulate filter
Tùy chỉnhCó sẵn dựa trên ứng dụng dự định và môi trường hoạt động.

Các tùy chọn có sẵn

Acid, base, VOC or combined adsorbent blendHEPA H14 or ULPA U15-U16 final stageGas sampling portsDifferential-pressure monitoring for both stages

Planning a AMC Chemical Filter FFU specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi
Email cho chúng tôi WhatsApp WeChat

Trang chủ

Sản phẩm

Tin tức

Về chúng tôi

Liên hệ