English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أدوات اختبار الغرفة النظيفة والتحقق من صحتها
Aerosol Photometer
A portable forward-light-scattering photometer for measuring aerosol concentration and locating penetration across installed HEPA and ULPA filtration systems.
- Real-time aerosol penetration measurement for filter scans.
- Controlled sample flow with automatic zeroing.
- Portable interface for cleanroom validation teams.
مقدمة المنتج
This aerosol photometer draws a controlled sample through a light-scattering chamber and reports challenge concentration or filter penetration in real time. Dedicated upstream, downstream and clear-flow connections support the complete integrity-test sequence, while a color interface presents the baseline, alarm threshold and live scan response. The rugged portable enclosure accommodates field validation work in cleanrooms, laboratories and containment facilities.
الخصائص الرئيسية
Automatic zero and upstream normalization reduce setup steps before scanning.
Regulated sample flow supports repeatable probe response and leak localization.
Selectable audible and visual alarms alert the operator at the chosen threshold.
Dedicated upstream, downstream and clear ports organize the sampling sequence.
Portable enclosure and probe interface support room-to-room validation work.
مخاوف المنتج للعملاء
A dependable integrity scan requires stable sample flow, a clean zero reference and immediate indication of localized aerosol penetration.
Unstable sample flow can change response while the probe crosses the filter face.Closed-loop flow regulation maintains a defined sampling rate through the optical chamber.
Residual aerosol can delay zeroing between upstream and downstream measurements.A dedicated clear-air path purges the sample train and establishes the zero baseline.
Small penetration peaks may be missed during a long manual scan.A configurable alarm and peak indication draw attention to threshold excursions in real time.
Incorrect reagent response can bias concentration readings.Selectable response settings accommodate common PAO, DEHS, DOP and paraffin challenge liquids.
تطبيقات نموذجية
Installed HEPA and ULPA filter integrity testingCleanroom and pharmaceutical HVAC qualificationشهادة مجلس الوزراء السلامة البيولوجيةContainment and nuclear ventilation filter testingLeak localization around filter media, frames and seals
المعلمات الفنية
Common construction values for portable aerosol photometers are summarized below; optical range, flow control and data features vary with the selected configuration.
| المواد الأساسية | Forward-scattering optical chamber, regulated sampling pump, reference filtration path and digital control electronics |
|---|---|
| سمك اللوحة | Typically 1.0-2.0 mm for the protective enclosure panels |
| العرض الفعال | Approximately 240-320 mm depending on display and valve configuration |
| الحد الأقصى الطول | Approximately 320-420 mm including sampling fittings and protective handle |
| الصلب يواجه سمك | عادة 1.0-1.5 مم الفولاذ المقاوم للصدأ أو مسحوق المغلفة مواجهة |
| الكثافة الأساسية | Approximately 7900-8000 kg/m³ for stainless sample-path and enclosure components |
| الموصلية الحرارية | ما يقرب من 14-17 واط / (m·K) لمكونات مسار العينة الفولاذية |
| إنهاء السطح | Light-gray powder-coated enclosure with dark bezel, color display and stainless sampling fittings |
| نوع المشترك | Barbed or quick-connect upstream, downstream and clear sampling ports with locking probe connector |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Handheld isokinetic scanning probeProbe-mounted display and controlsSealed sample trainBattery or universal AC powerUSB data export and optional printerProtective transport case
Planning a Aerosol Photometer specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
