İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Test ve Validasyon Aletleri
Aerosol Fotometre
A portable forward-light-scattering photometer for measuring aerosol concentration and locating penetration across installed HEPA and ULPA filtration systems.
- Real-time aerosol penetration measurement for filter scans.
- Controlled sample flow with automatic zeroing.
- Portable interface for cleanroom validation teams.
Ürün tanıtımı
This aerosol photometer draws a controlled sample through a light-scattering chamber and reports challenge concentration or filter penetration in real time. Dedicated upstream, downstream and clear-flow connections support the complete integrity-test sequence, while a color interface presents the baseline, alarm threshold and live scan response. The rugged portable enclosure accommodates field validation work in cleanrooms, laboratories and containment facilities.
Ana Özellikler
Automatic zero and upstream normalization reduce setup steps before scanning.
Regulated sample flow supports repeatable probe response and leak localization.
Selectable audible and visual alarms alert the operator at the chosen threshold.
Dedicated upstream, downstream and clear ports organize the sampling sequence.
Portable enclosure and probe interface support room-to-room validation work.
Müşteri Ürün Sorunları
A dependable integrity scan requires stable sample flow, a clean zero reference and immediate indication of localized aerosol penetration.
Unstable sample flow can change response while the probe crosses the filter face.Closed-loop flow regulation maintains a defined sampling rate through the optical chamber.
Residual aerosol can delay zeroing between upstream and downstream measurements.A dedicated clear-air path purges the sample train and establishes the zero baseline.
Small penetration peaks may be missed during a long manual scan.A configurable alarm and peak indication draw attention to threshold excursions in real time.
Incorrect reagent response can bias concentration readings.Selectable response settings accommodate common PAO, DEHS, DOP and paraffin challenge liquids.
Tipik uygulamalar
Installed HEPA and ULPA filter integrity testingCleanroom and pharmaceutical HVAC qualificationBiyolojik Güvenlik Kabine SertifikasıContainment and nuclear ventilation filter testingLeak localization around filter media, frames and seals
Teknik parametreler
Common construction values for portable aerosol photometers are summarized below; optical range, flow control and data features vary with the selected configuration.
| Temel malzemeler | Forward-scattering optical chamber, regulated sampling pump, reference filtration path and digital control electronics |
|---|---|
| Panel kalınlığı | Typically 1.0-2.0 mm for the protective enclosure panels |
| Effective Width (Etkili Genişlik) | Approximately 240-320 mm depending on display and valve configuration |
| Maksimum uzunluk | Approximately 320-420 mm including sampling fittings and protective handle |
| Çelik yüz yüze kalınlığı | Tipik olarak 1,0-1.5 mm paslanmaz veya toz kaplı çelik yüzü |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7900-8000 kg/m³ for stainless sample-path and enclosure components |
| Termal İletkenlik | Paslanmaz örnek yolu bileşenleri için yaklaşık 14-17 W / (m·K) |
| Yüzey bitirme | Light-gray powder-coated enclosure with dark bezel, color display and stainless sampling fittings |
| Ortak tip | Barbed or quick-connect upstream, downstream and clear sampling ports with locking probe connector |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Handheld isokinetic scanning probeProbe-mounted display and controlsSealed sample trainBattery or universal AC powerUSB data export and optional printerProtective transport case
Planning a Aerosol Photometer specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
