Aerosol photometer in three-quarter front view on a white background

Приборы для испытаний и валидации в чистых помещениях

Аэрозольный фотометр

A portable forward-light-scattering photometer for measuring aerosol concentration and locating penetration across installed HEPA and ULPA filtration systems.

Real-time aerosol penetration measurement for filter scans.
Controlled sample flow with automatic zeroing.
Portable interface for cleanroom validation teams.

Запрос котировки Просмотреть продукты

Введение продукции

This aerosol photometer draws a controlled sample through a light-scattering chamber and reports challenge concentration or filter penetration in real time. Dedicated upstream, downstream and clear-flow connections support the complete integrity-test sequence, while a color interface presents the baseline, alarm threshold and live scan response. The rugged portable enclosure accommodates field validation work in cleanrooms, laboratories and containment facilities.

Основные характеристики

Forward light scattering provides continuous response across filter scan locations.

Automatic zero and upstream normalization reduce setup steps before scanning.

Regulated sample flow supports repeatable probe response and leak localization.

Selectable audible and visual alarms alert the operator at the chosen threshold.

Dedicated upstream, downstream and clear ports organize the sampling sequence.

Portable enclosure and probe interface support room-to-room validation work.

Обеспокоенность клиентов продуктами

A dependable integrity scan requires stable sample flow, a clean zero reference and immediate indication of localized aerosol penetration.

Unstable sample flow can change response while the probe crosses the filter face.Closed-loop flow regulation maintains a defined sampling rate through the optical chamber.

Residual aerosol can delay zeroing between upstream and downstream measurements.A dedicated clear-air path purges the sample train and establishes the zero baseline.

Small penetration peaks may be missed during a long manual scan.A configurable alarm and peak indication draw attention to threshold excursions in real time.

Incorrect reagent response can bias concentration readings.Selectable response settings accommodate common PAO, DEHS, DOP and paraffin challenge liquids.

Типичные приложения

Installed HEPA and ULPA filter integrity testingCleanroom and pharmaceutical HVAC qualificationBiological safety cabinet certificationContainment and nuclear ventilation filter testingLeak localization around filter media, frames and seals

Технические параметры

Common construction values for portable aerosol photometers are summarized below; optical range, flow control and data features vary with the selected configuration.

Основной материал	Forward-scattering optical chamber, regulated sampling pump, reference filtration path and digital control electronics
Толщина панели	Typically 1.0-2.0 mm for the protective enclosure panels
эффективная ширина	Approximately 240-320 mm depending on display and valve configuration
Максимальная длина	Approximately 320-420 mm including sampling fittings and protective handle
Толщина линий стали	Typically 1.0-1.5 mm stainless or powder-coated steel facing
Плотность ядра	Approximately 7900-8000 kg/m³ for stainless sample-path and enclosure components
Теплопроводимость	Approximately 14-17 W/(m·K) for stainless sample-path components
Поверхностная отделка	Light-gray powder-coated enclosure with dark bezel, color display and stainless sampling fittings
Объединенный тип	Barbed or quick-connect upstream, downstream and clear sampling ports with locking probe connector
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Handheld isokinetic scanning probeProbe-mounted display and controlsSealed sample trainBattery or universal AC powerUSB data export and optional printerЗащитный транспортный корпус

Planning a Aerosol Photometer specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой