Sterilize-in-place system three-quarter view with steam separator and four-branch manifold

Temiz Oda Hizmet Sistemi

Sterilize-in-Place Sistemleri

A monitored clean-steam distribution skid that sequences steam admission, air removal, hold time and condensate discharge across connected hygienic process circuits.

Sequenced clean-steam admission
Drainable condensate management
Multi-point temperature monitoring

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The Sterilize-in-Place System receives qualified clean steam, separates entrained condensate and routes steam through an automated hygienic valve manifold to connected vessels, piping or filling circuits. Pressure, drain and temperature instruments support controlled air displacement, exposure and cooling phases without dismantling the process path.

Ana Özellikler

Polished 316L clean-steam contact path

Vertical inlet separator

Automated multi-branch valve manifold

Low-point thermostatic condensate removal

Independent branch temperature inputs

Pressure indication and regulation interface

Recipe-based sterilization sequencing

HMI alarms and phase status

Müşteri Ürün Sorunları

Effective SIP depends on removing air and condensate, exposing every wetted surface to the selected condition and documenting stable hold points without damaging seals or instruments.

Cold pockets form behind retained condensateProvide sloped branches and dedicated hygienic traps at verified low points before starting the exposure hold.

Parallel circuits heat at different ratesSequence branch valves and monitor representative return temperatures independently.

Steam pressure varies during valve changesCoordinate inlet pressure control with staged branch admission and live pressure indication.

Operators cannot distinguish exposure from coolingUse recipe phases, permissives and alarms to separate air purge, heat-up, hold, depressurization and cooling.

Tipik uygulamalar

Bioreactor and fermenter circuitsSterile transfer pipingAseptic filling product pathsPharmaceutical process vesselsHygienic filtration housings

Teknik parametreler

Branch count, steam demand, valve sizing, trap capacity, temperature inputs and sequencing logic are selected for the connected equipment and approved sterilization cycle.

Temel malzemeler	316L stainless steel clean-steam separator, header and hygienic branch piping
Panel kalınlığı	Separator shell typically 2.0–5.0 mm
Effective Width (Etkili Genişlik)	Skid width typically 900–2200 mm
Maksimum uzunluk	Complete skid length typically up to 3500 mm
Çelik yüz yüze kalınlığı	Control enclosure and skid sheet typically 1.5–3.0 mm
Core Density (Çekirdek Yoğunluğu)	316L stainless steel density approximately 8000 kg/m³
Termal İletkenlik	316L stainless steel approximately 15 W/(m·K) at ambient temperature
Yüzey bitirme	Polished clean-steam surfaces with satin-finished skid and control enclosure
Ortak tip	Orbital-welded hygienic header with sanitary clamps at valves, instruments and condensate trap
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Two to eight sterilization branchesSteam pressure-reducing stationBranch return-temperature sensorsHygienic thermostatic steam trapsSterile-air cooling interfaceRecipe and batch-report communicationInsulated steam piping

Planning a Sterilize-in-Place System specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun