Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de utilidad de Cleanroom
Sistema de esterilización en el lugar
A monitored clean-steam distribution skid that sequences steam admission, air removal, hold time and condensate discharge across connected hygienic process circuits.
- Sequenced clean-steam admission
- Drainable condensate management
- Multi-point temperature monitoring
Introducción del producto
The Sterilize-in-Place System receives qualified clean steam, separates entrained condensate and routes steam through an automated hygienic valve manifold to connected vessels, piping or filling circuits. Pressure, drain and temperature instruments support controlled air displacement, exposure and cooling phases without dismantling the process path.
Características clave
Vertical inlet separator
Automated multi-branch valve manifold
Low-point thermostatic condensate removal
Independent branch temperature inputs
Pressure indication and regulation interface
Recipe-based sterilization sequencing
HMI alarms and phase status
Preocupaciones del producto del cliente
Effective SIP depends on removing air and condensate, exposing every wetted surface to the selected condition and documenting stable hold points without damaging seals or instruments.
Cold pockets form behind retained condensateProvide sloped branches and dedicated hygienic traps at verified low points before starting the exposure hold.
Parallel circuits heat at different ratesSequence branch valves and monitor representative return temperatures independently.
Steam pressure varies during valve changesCoordinate inlet pressure control with staged branch admission and live pressure indication.
Operators cannot distinguish exposure from coolingUse recipe phases, permissives and alarms to separate air purge, heat-up, hold, depressurization and cooling.
Aplicaciones típicas
Bioreactor and fermenter circuitsSterile transfer pipingAseptic filling product pathsPharmaceutical process vesselsHygienic filtration housings
Parámetros técnicos
Branch count, steam demand, valve sizing, trap capacity, temperature inputs and sequencing logic are selected for the connected equipment and approved sterilization cycle.
| Materiales Core | 316L stainless steel clean-steam separator, header and hygienic branch piping |
|---|---|
| Panel de espesor | Separator shell typically 2.0–5.0 mm |
| Ancho efectivo | Skid width typically 900–2200 mm |
| Longitud máxima | Complete skid length typically up to 3500 mm |
| Acero frente a espesor | Control enclosure and skid sheet typically 1.5–3.0 mm |
| Densidad Core | 316L stainless steel density approximately 8000 kg/m³ |
| Conductividad térmica | 316L stainless steel approximately 15 W/(m·K) at ambient temperature |
| Superficie acabada | Polished clean-steam surfaces with satin-finished skid and control enclosure |
| Tipo conjunto | Orbital-welded hygienic header with sanitary clamps at valves, instruments and condensate trap |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Two to eight sterilization branchesSteam pressure-reducing stationBranch return-temperature sensorsHygienic thermostatic steam trapsSterile-air cooling interfaceRecipe and batch-report communicationInsulated steam piping
Planning a Sterilize-in-Place System specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
