Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Systèmes utilitaires Cleanroom
Système de stérilisation en place
A monitored clean-steam distribution skid that sequences steam admission, air removal, hold time and condensate discharge across connected hygienic process circuits.
- Sequenced clean-steam admission
- Drainable condensate management
- Multi-point temperature monitoring
Introduction de produit
The Sterilize-in-Place System receives qualified clean steam, separates entrained condensate and routes steam through an automated hygienic valve manifold to connected vessels, piping or filling circuits. Pressure, drain and temperature instruments support controlled air displacement, exposure and cooling phases without dismantling the process path.
Key Features
Vertical inlet separator
Automated multi-branch valve manifold
Low-point thermostatic condensate removal
Independent branch temperature inputs
Pressure indication and regulation interface
Recipe-based sterilization sequencing
HMI alarms and phase status
Préoccupations du client produit
Effective SIP depends on removing air and condensate, exposing every wetted surface to the selected condition and documenting stable hold points without damaging seals or instruments.
Cold pockets form behind retained condensateProvide sloped branches and dedicated hygienic traps at verified low points before starting the exposure hold.
Parallel circuits heat at different ratesSequence branch valves and monitor representative return temperatures independently.
Steam pressure varies during valve changesCoordinate inlet pressure control with staged branch admission and live pressure indication.
Operators cannot distinguish exposure from coolingUse recipe phases, permissives and alarms to separate air purge, heat-up, hold, depressurization and cooling.
Les applications typiques
Bioreactor and fermenter circuitsSterile transfer pipingAseptic filling product pathsPharmaceutical process vesselsHygienic filtration housings
Paramètres techniques
Branch count, steam demand, valve sizing, trap capacity, temperature inputs and sequencing logic are selected for the connected equipment and approved sterilization cycle.
| Matériaux de base | 316L stainless steel clean-steam separator, header and hygienic branch piping |
|---|---|
| Panneau épaisseur | Separator shell typically 2.0–5.0 mm |
| Largeur effective | Skid width typically 900–2200 mm |
| Longueur maximale | Complete skid length typically up to 3500 mm |
| Acier face épaisseur | Control enclosure and skid sheet typically 1.5–3.0 mm |
| Densité Core | 316L stainless steel density approximately 8000 kg/m³ |
| Conductivité thermique | 316L stainless steel approximately 15 W/(m·K) at ambient temperature |
| surface finie | Polished clean-steam surfaces with satin-finished skid and control enclosure |
| Type joint | Orbital-welded hygienic header with sanitary clamps at valves, instruments and condensate trap |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Two to eight sterilization branchesSteam pressure-reducing stationBranch return-temperature sensorsHygienic thermostatic steam trapsSterile-air cooling interfaceRecipe and batch-report communicationInsulated steam piping
Planning a Sterilize-in-Place System specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
