Sterilize-in-place system three-quarter view with steam separator and four-branch manifold

Sistem Utilitas Cleanroom

Sistem Sterilisasi-in - Place

A monitored clean-steam distribution skid that sequences steam admission, air removal, hold time and condensate discharge across connected hygienic process circuits.

Sequenced clean-steam admission
Drainable condensate management
Multi-point temperature monitoring

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The Sterilize-in-Place System receives qualified clean steam, separates entrained condensate and routes steam through an automated hygienic valve manifold to connected vessels, piping or filling circuits. Pressure, drain and temperature instruments support controlled air displacement, exposure and cooling phases without dismantling the process path.

Fitur utama:

Polished 316L clean-steam contact path

Vertical inlet separator

Automated multi-branch valve manifold

Low-point thermostatic condensate removal

Independent branch temperature inputs

Pressure indication and regulation interface

Recipe-based sterilization sequencing

HMI alarms and phase status

Kekhawatiran produk pelanggan

Effective SIP depends on removing air and condensate, exposing every wetted surface to the selected condition and documenting stable hold points without damaging seals or instruments.

Cold pockets form behind retained condensateProvide sloped branches and dedicated hygienic traps at verified low points before starting the exposure hold.

Parallel circuits heat at different ratesSequence branch valves and monitor representative return temperatures independently.

Steam pressure varies during valve changesCoordinate inlet pressure control with staged branch admission and live pressure indication.

Operators cannot distinguish exposure from coolingUse recipe phases, permissives and alarms to separate air purge, heat-up, hold, depressurization and cooling.

Aplikasi yang Tipis

Bioreactor and fermenter circuitsSterile transfer pipingAseptic filling product pathsPharmaceutical process vesselsHygienic filtration housings

Parameter teknis

Branch count, steam demand, valve sizing, trap capacity, temperature inputs and sequencing logic are selected for the connected equipment and approved sterilization cycle.

Bahan inti	316L stainless steel clean-steam separator, header and hygienic branch piping
Ketebalan Panel (Panel Thickness)	Separator shell typically 2.0–5.0 mm
Efektif lebar	Skid width typically 900–2200 mm
Panjang maksimum	Complete skid length typically up to 3500 mm
Baja menghadap ketebalan	Control enclosure and skid sheet typically 1.5–3.0 mm
Kepadatan inti (core density)	316L stainless steel kepadatan sekitar 8000 kg / m3
Konduktivitas Termal (Thermal Conductivity)	316L stainless steel sekitar 15 W / (m · K) pada suhu ambien
Permukaan selesai	Polished clean-steam surfaces with satin-finished skid and control enclosure
Jenis Bersama	Orbital-welded hygienic header with sanitary clamps at valves, instruments and condensate trap
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Two to eight sterilization branchesSteam pressure-reducing stationBranch return-temperature sensorsHygienic thermostatic steam trapsSterile-air cooling interfaceRecipe and batch-report communicationInsulated steam piping

Planning a Sterilize-in-Place System specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami