Blue-gray static-dissipative PVC flooring roll with welding rod and copper strip

Temiz Oda zemin sistemleri

Static-Dissipative PVC zemin

A homogeneous PVC floor with controlled static-dissipative resistance for laboratories, healthcare rooms and electronics areas that do not require a lower-resistance conductive floor.

1×10⁶–1×10⁹ Ω Range
Controlled Charge Decay
Heavy-Traffic Homogeneous Body
Welded Cleanable Finish

Alıntı isteği Browse ürünleri

Ürün tanıtımı

Static-dissipative PVC flooring provides a moderated path to ground that sits between insulating resilient flooring and lower-resistance conductive systems. Dissipative ingredients are integrated throughout the homogeneous wear layer, so the electrical function remains available as the surface wears. Sheet and tile formats can be bonded into a grounded installation, with sheet joints hot welded for areas that need a closed cleaning surface. The wider resistance window suits controlled spaces where personnel comfort, equipment protection and leakage-current considerations must be balanced.

Ana Özellikler

The 1×10⁶–1×10⁹ Ω resistance range drains charge more gradually than electrostatic-conductive flooring.

Static-control ingredients extend through the homogeneous layer rather than existing only in a removable coating.

A dense 2 mm construction withstands castor traffic in laboratories and clinical support rooms.

Matching welding rod creates a closed seam across sheet installations and site-formed coving.

Müşteri Ürün Sorunları

Many controlled rooms need reliable static decay without the very low resistance or installation regime of a conductive floor.

Insulating vinyl allows charge to remain on personnel and mobile equipment.The dissipative matrix provides a specified path to ground across the installed floor.

A highly conductive system may be unnecessary for moderate-sensitivity equipment.The higher 1×10⁶–1×10⁹ Ω range delivers controlled decay suited to dissipative applications.

Temporary ESD polishes require frequent electrical and maintenance checks.Permanent ingredients in the full-thickness PVC body provide the primary static-control function.

Mixed sheet and tile zones create uncertainty about grounding continuity.A defined adhesive, copper-strip and test-point layout gives the complete floor a traceable earth path.

Tipik uygulamalar

Cleanroom laboratoriesHospital diagnostic and preparation roomsElectronics inspection areasInstrument service roomsControlled research facilities

Teknik parametreler

Typical values for a homogeneous static-dissipative PVC floor covering are listed below.

Temel malzemeler	Homogeneous PVC compound with permanent static-dissipative additives and mineral filler
Panel kalınlığı	2.0 mm total homogeneous sheet or tile thickness
Effective Width (Etkili Genişlik)	2000 mm standard sheet width
Maksimum uzunluk	Up to 20000 mm standard roll length
Çelik yüz yüze kalınlığı	0 mm; no steel facing is used in the dissipative PVC covering
Core Density (Çekirdek Yoğunluğu)	Approximately 1700 kg/m³ based on a 3400 g/m² sheet at 2.0 mm thickness
Termal İletkenlik	Approximately 0.25 W/(m·K) for homogeneous static-control PVC
Yüzey bitirme	Smooth marbleized homogeneous finish designed for static-control cleaning regimes
Ortak tip	Heat-welded sheet seams or close-fit tiles bonded into a copper-grounded adhesive system
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Two-metre sheet or 600–610 mm tile formatNeutral, cool and zoning color palettesMatching welding rod and coved skirtingGrounding strips and conductive adhesive package

Planning a Static-Dissipative PVC Flooring specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun