Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Flooring Systemen
Statisch-dissipatives PVC-Boden
A homogeneous PVC floor with controlled static-dissipative resistance for laboratories, healthcare rooms and electronics areas that do not require a lower-resistance conductive floor.
- 1×10⁶–1×10⁹ Ω Range
- Controlled Charge Decay
- Heavy-Traffic Homogeneous Body
- Welded Cleanable Finish
Produkteinführung
Static-dissipative PVC flooring provides a moderated path to ground that sits between insulating resilient flooring and lower-resistance conductive systems. Dissipative ingredients are integrated throughout the homogeneous wear layer, so the electrical function remains available as the surface wears. Sheet and tile formats can be bonded into a grounded installation, with sheet joints hot welded for areas that need a closed cleaning surface. The wider resistance window suits controlled spaces where personnel comfort, equipment protection and leakage-current considerations must be balanced.
Key Features
Static-control ingredients extend through the homogeneous layer rather than existing only in a removable coating.
A dense 2 mm construction withstands castor traffic in laboratories and clinical support rooms.
Matching welding rod creates a closed seam across sheet installations and site-formed coving.
Kunden Produktbedenken
Many controlled rooms need reliable static decay without the very low resistance or installation regime of a conductive floor.
Insulating vinyl allows charge to remain on personnel and mobile equipment.The dissipative matrix provides a specified path to ground across the installed floor.
A highly conductive system may be unnecessary for moderate-sensitivity equipment.The higher 1×10⁶–1×10⁹ Ω range delivers controlled decay suited to dissipative applications.
Temporary ESD polishes require frequent electrical and maintenance checks.Permanent ingredients in the full-thickness PVC body provide the primary static-control function.
Mixed sheet and tile zones create uncertainty about grounding continuity.A defined adhesive, copper-strip and test-point layout gives the complete floor a traceable earth path.
Typische Anwendungen
Cleanroom laboratoriesHospital diagnostic and preparation roomsElectronics inspection areasInstrument service roomsControlled research facilities
Technische Parameter
Typical values for a homogeneous static-dissipative PVC floor covering are listed below.
| Core Material | Homogeneous PVC compound with permanent static-dissipative additives and mineral filler |
|---|---|
| Panel Dicke | 2.0 mm total homogeneous sheet or tile thickness |
| Effektive Breite | 2000 mm Standardblattbreite |
| Maximale Länge | Bis zu 20000 mm Standardrollenlänge |
| Stahl facing Dicke | 0 mm; no steel facing is used in the dissipative PVC covering |
| Kerndichte | Approximately 1700 kg/m³ based on a 3400 g/m² sheet at 2.0 mm thickness |
| Thermische Leitfähigkeit | Approximately 0.25 W/(m·K) for homogeneous static-control PVC |
| Oberfläche Finish | Smooth marbleized homogeneous finish designed for static-control cleaning regimes |
| Gemeinsamer Typ | Heat-welded sheet seams or close-fit tiles bonded into a copper-grounded adhesive system |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Two-metre sheet or 600–610 mm tile formatNeutral, cool and zoning color palettesMatching welding rod and coved skirtingGrounding strips and conductive adhesive package
Planning a Static-Dissipative PVC Flooring specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
