Blue-gray static-dissipative PVC flooring roll with welding rod and copper strip

클린룸 바닥 시스템

정적 소모 PVC 바닥

A homogeneous PVC floor with controlled static-dissipative resistance for laboratories, healthcare rooms and electronics areas that do not require a lower-resistance conductive floor.

1×10⁶–1×10⁹ Ω Range
Controlled Charge Decay
Heavy-Traffic Homogeneous Body
Welded Cleanable Finish

견적 요청 제품 찾아보기

상품 소개

Static-dissipative PVC flooring provides a moderated path to ground that sits between insulating resilient flooring and lower-resistance conductive systems. Dissipative ingredients are integrated throughout the homogeneous wear layer, so the electrical function remains available as the surface wears. Sheet and tile formats can be bonded into a grounded installation, with sheet joints hot welded for areas that need a closed cleaning surface. The wider resistance window suits controlled spaces where personnel comfort, equipment protection and leakage-current considerations must be balanced.

주요 기능

The 1×10⁶–1×10⁹ Ω resistance range drains charge more gradually than electrostatic-conductive flooring.

Static-control ingredients extend through the homogeneous layer rather than existing only in a removable coating.

A dense 2 mm construction withstands castor traffic in laboratories and clinical support rooms.

Matching welding rod creates a closed seam across sheet installations and site-formed coving.

고객 제품 관심사

Many controlled rooms need reliable static decay without the very low resistance or installation regime of a conductive floor.

Insulating vinyl allows charge to remain on personnel and mobile equipment.The dissipative matrix provides a specified path to ground across the installed floor.

A highly conductive system may be unnecessary for moderate-sensitivity equipment.The higher 1×10⁶–1×10⁹ Ω range delivers controlled decay suited to dissipative applications.

Temporary ESD polishes require frequent electrical and maintenance checks.Permanent ingredients in the full-thickness PVC body provide the primary static-control function.

Mixed sheet and tile zones create uncertainty about grounding continuity.A defined adhesive, copper-strip and test-point layout gives the complete floor a traceable earth path.

일반적인 응용 프로그램

Cleanroom laboratoriesHospital diagnostic and preparation roomsElectronics inspection areasInstrument service roomsControlled research facilities

기술 매개변수

Typical values for a homogeneous static-dissipative PVC floor covering are listed below.

핵심 재료	Homogeneous PVC compound with permanent static-dissipative additives and mineral filler
패널 두께	2.0 mm total homogeneous sheet or tile thickness
유효 폭	2000 mm standard sheet width
최대 길이	Up to 20000 mm standard roll length
강철 면면 두께	0 mm; no steel facing is used in the dissipative PVC covering
코어 밀도	Approximately 1700 kg/m³ based on a 3400 g/m² sheet at 2.0 mm thickness
열전도도 (Thermal Conductivity)	Approximately 0.25 W/(m·K) for homogeneous static-control PVC
표면 마무리	Smooth marbleized homogeneous finish designed for static-control cleaning regimes
접합 유형	Heat-welded sheet seams or close-fit tiles bonded into a copper-grounded adhesive system
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Two-metre sheet or 600–610 mm tile formatNeutral, cool and zoning color palettesMatching welding rod and coved skirtingGrounding strips and conductive adhesive package

Planning a Static-Dissipative PVC Flooring specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.