Blue-gray static-dissipative PVC flooring roll with welding rod and copper strip

クリーンルームフロアシステム

静的放散 PVC フローリング

A homogeneous PVC floor with controlled static-dissipative resistance for laboratories, healthcare rooms and electronics areas that do not require a lower-resistance conductive floor.

1×10⁶–1×10⁹ Ω Range
Controlled Charge Decay
Heavy-Traffic Homogeneous Body
Welded Cleanable Finish

見積もりリクエスト製品案内

商品紹介

Static-dissipative PVC flooring provides a moderated path to ground that sits between insulating resilient flooring and lower-resistance conductive systems. Dissipative ingredients are integrated throughout the homogeneous wear layer, so the electrical function remains available as the surface wears. Sheet and tile formats can be bonded into a grounded installation, with sheet joints hot welded for areas that need a closed cleaning surface. The wider resistance window suits controlled spaces where personnel comfort, equipment protection and leakage-current considerations must be balanced.

主要な特徴

The 1×10⁶–1×10⁹ Ω resistance range drains charge more gradually than electrostatic-conductive flooring.

Static-control ingredients extend through the homogeneous layer rather than existing only in a removable coating.

A dense 2 mm construction withstands castor traffic in laboratories and clinical support rooms.

Matching welding rod creates a closed seam across sheet installations and site-formed coving.

お客様の製品に関する懸念事項

Many controlled rooms need reliable static decay without the very low resistance or installation regime of a conductive floor.

Insulating vinyl allows charge to remain on personnel and mobile equipment.The dissipative matrix provides a specified path to ground across the installed floor.

A highly conductive system may be unnecessary for moderate-sensitivity equipment.The higher 1×10⁶–1×10⁹ Ω range delivers controlled decay suited to dissipative applications.

Temporary ESD polishes require frequent electrical and maintenance checks.Permanent ingredients in the full-thickness PVC body provide the primary static-control function.

Mixed sheet and tile zones create uncertainty about grounding continuity.A defined adhesive, copper-strip and test-point layout gives the complete floor a traceable earth path.

典型的な用途

Cleanroom laboratoriesHospital diagnostic and preparation roomsElectronics inspection areasInstrument service roomsControlled research facilities

技術的なパラメータ

Typical values for a homogeneous static-dissipative PVC floor covering are listed below.

コア材料	Homogeneous PVC compound with permanent static-dissipative additives and mineral filler
パネルの厚さ	2.0 mm total homogeneous sheet or tile thickness
有効幅	2000 mm standard sheet width
最大長さ	Up to 20000 mm standard roll length
鋼鉄の厚さを直面する	0 mm; no steel facing is used in the dissipative PVC covering
コア密度	Approximately 1700 kg/m³ based on a 3400 g/m² sheet at 2.0 mm thickness
熱伝導率	Approximately 0.25 W/(m·K) for homogeneous static-control PVC
表面仕上げ	Smooth marbleized homogeneous finish designed for static-control cleaning regimes
ジョイントタイプ	Heat-welded sheet seams or close-fit tiles bonded into a copper-grounded adhesive system
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Two-metre sheet or 600–610 mm tile formatNeutral, cool and zoning color palettesMatching welding rod and coved skirtingGrounding strips and conductive adhesive package

Planning a Static-Dissipative PVC Flooring specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する