Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pisos de sala limpia
Piso de PVC estático-dissipativo
A homogeneous PVC floor with controlled static-dissipative resistance for laboratories, healthcare rooms and electronics areas that do not require a lower-resistance conductive floor.
- 1×10⁶–1×10⁹ Ω Range
- Controlled Charge Decay
- Heavy-Traffic Homogeneous Body
- Welded Cleanable Finish
Introducción del producto
Static-dissipative PVC flooring provides a moderated path to ground that sits between insulating resilient flooring and lower-resistance conductive systems. Dissipative ingredients are integrated throughout the homogeneous wear layer, so the electrical function remains available as the surface wears. Sheet and tile formats can be bonded into a grounded installation, with sheet joints hot welded for areas that need a closed cleaning surface. The wider resistance window suits controlled spaces where personnel comfort, equipment protection and leakage-current considerations must be balanced.
Características clave
Static-control ingredients extend through the homogeneous layer rather than existing only in a removable coating.
A dense 2 mm construction withstands castor traffic in laboratories and clinical support rooms.
Matching welding rod creates a closed seam across sheet installations and site-formed coving.
Preocupaciones del producto del cliente
Many controlled rooms need reliable static decay without the very low resistance or installation regime of a conductive floor.
Insulating vinyl allows charge to remain on personnel and mobile equipment.The dissipative matrix provides a specified path to ground across the installed floor.
A highly conductive system may be unnecessary for moderate-sensitivity equipment.The higher 1×10⁶–1×10⁹ Ω range delivers controlled decay suited to dissipative applications.
Temporary ESD polishes require frequent electrical and maintenance checks.Permanent ingredients in the full-thickness PVC body provide the primary static-control function.
Mixed sheet and tile zones create uncertainty about grounding continuity.A defined adhesive, copper-strip and test-point layout gives the complete floor a traceable earth path.
Aplicaciones típicas
Cleanroom laboratoriesHospital diagnostic and preparation roomsElectronics inspection areasInstrument service roomsControlled research facilities
Parámetros técnicos
Typical values for a homogeneous static-dissipative PVC floor covering are listed below.
| Materiales Core | Homogeneous PVC compound with permanent static-dissipative additives and mineral filler |
|---|---|
| Panel de espesor | 2.0 mm total homogeneous sheet or tile thickness |
| Ancho efectivo | 2000 mm standard sheet width |
| Longitud máxima | Up to 20000 mm standard roll length |
| Acero frente a espesor | 0 mm; no steel facing is used in the dissipative PVC covering |
| Densidad Core | Approximately 1700 kg/m³ based on a 3400 g/m² sheet at 2.0 mm thickness |
| Conductividad térmica | Approximately 0.25 W/(m·K) for homogeneous static-control PVC |
| Superficie acabada | Smooth marbleized homogeneous finish designed for static-control cleaning regimes |
| Tipo conjunto | Heat-welded sheet seams or close-fit tiles bonded into a copper-grounded adhesive system |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Two-metre sheet or 600–610 mm tile formatNeutral, cool and zoning color palettesMatching welding rod and coved skirtingGrounding strips and conductive adhesive package
Planning a Static-Dissipative PVC Flooring specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
