İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Hava filtreleri ve kimyasal filtrasyon
Yan Erişim HEPA Filtre Konut
A duct-mounted cabinet with removable side doors and a positive-pressure clamping mechanism for servicing HEPA filters from either side.
- Dual-Side Service
- Positive Crank Seal
- Integrated Prefilter Track
- Welded Weatherproof Cabinet
Ürün tanıtımı
This housing positions HEPA or ULPA filters perpendicular to the duct and allows them to slide in from either side. A crank or lever mechanism transfers force evenly to each filter gasket, producing a repeatable seal without access from the air face. Removable gasketed doors close both service openings, and an upstream track accepts a shallow prefilter. Standing flanges, pressure taps and challenge ports simplify integration into clean manufacturing and healthcare air systems.
Ana Özellikler
A spring-loaded crank mechanism distributes sealing pressure across each filter row.
The separate prefilter track protects the absolute filter from coarse loading.
External pressure ports support differential-pressure monitoring without opening the cabinet.
Müşteri Ürün Sorunları
A ducted HEPA bank must be serviceable in a narrow plantroom while maintaining uniform gasket compression.
Only one side of the filter bank remains reachable after installation.Removable doors on both sides allow the usable service direction to be selected on site.
Hand-tightened clips apply unequal pressure around a large HEPA gasket.The crank mechanism applies coordinated sealing force across the filter row.
Coarse dust shortens expensive HEPA filter life.An integral prefilter track captures larger particles before the final filter.
A door seal leaks after repeated maintenance cycles.Square reinforced doors and high-memory perimeter gasketing maintain contact around the opening.
Tipik uygulamalar
Cleanroom air-handler final filtrationHospital supply and exhaust systemsPharmaceutical HVAC branchesLaboratory ventilationOutdoor equipment filter sections
Teknik parametreler
Representative materials and dimensions for a ducted side-access HEPA housing are listed below.
| Temel malzemeler | Welded galvanized or 304 stainless-steel cabinet with steel filter tracks and crank clamp |
|---|---|
| Panel kalınlığı | 1.5–2.0 mm all-welded housing panels |
| Effective Width (Etkili Genişlik) | 365–3920 mm for half- to six-filter-wide assemblies |
| Maksimum uzunluk | Up to 3920 mm bank length in modular multi-filter arrangements |
| Çelik yüz yüze kalınlığı | 1.5–2.0 mm galvanized or 304 stainless steel |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7850 kg/m³ for galvanized-steel cabinet components |
| Termal İletkenlik | Approximately 45–60 W/(m·K) for galvanized-steel construction |
| Yüzey bitirme | Mill-galvanized, brushed stainless steel or weather-resistant powder coat |
| Ortak tip | Standing duct flanges, dual gasketed access doors and crank-compressed filter gasket |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Galvanized or 304 stainless steelGasket- or gel-seal filter rackTwo-inch prefilter trackChallenge injection and scan ports
Planning a Side-Access HEPA Filter Housing specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
