English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Воздушные фильтры и химическая фильтрация
Оболочка бокового доступа для фильтра HEPA
A duct-mounted cabinet with removable side doors and a positive-pressure clamping mechanism for servicing HEPA filters from either side.
- Dual-Side Service
- Positive Crank Seal
- Integrated Prefilter Track
- Welded Weatherproof Cabinet
Введение продукции
This housing positions HEPA or ULPA filters perpendicular to the duct and allows them to slide in from either side. A crank or lever mechanism transfers force evenly to each filter gasket, producing a repeatable seal without access from the air face. Removable gasketed doors close both service openings, and an upstream track accepts a shallow prefilter. Standing flanges, pressure taps and challenge ports simplify integration into clean manufacturing and healthcare air systems.
Основные характеристики
A spring-loaded crank mechanism distributes sealing pressure across each filter row.
The separate prefilter track protects the absolute filter from coarse loading.
External pressure ports support differential-pressure monitoring without opening the cabinet.
Обеспокоенность клиентов продуктами
A ducted HEPA bank must be serviceable in a narrow plantroom while maintaining uniform gasket compression.
Only one side of the filter bank remains reachable after installation.Removable doors on both sides allow the usable service direction to be selected on site.
Hand-tightened clips apply unequal pressure around a large HEPA gasket.The crank mechanism applies coordinated sealing force across the filter row.
Coarse dust shortens expensive HEPA filter life.An integral prefilter track captures larger particles before the final filter.
A door seal leaks after repeated maintenance cycles.Square reinforced doors and high-memory perimeter gasketing maintain contact around the opening.
Типичные приложения
Cleanroom air-handler final filtrationHospital supply and exhaust systemsPharmaceutical HVAC branchesLaboratory ventilationOutdoor equipment filter sections
Технические параметры
Representative materials and dimensions for a ducted side-access HEPA housing are listed below.
| Основной материал | Welded galvanized or 304 stainless-steel cabinet with steel filter tracks and crank clamp |
|---|---|
| Толщина панели | 1.5–2.0 mm all-welded housing panels |
| эффективная ширина | 365–3920 mm for half- to six-filter-wide assemblies |
| Максимальная длина | Up to 3920 mm bank length in modular multi-filter arrangements |
| Толщина линий стали | 1.5–2.0 mm galvanized or 304 stainless steel |
| Плотность ядра | Approximately 7850 kg/m³ for galvanized-steel cabinet components |
| Теплопроводимость | Approximately 45–60 W/(m·K) for galvanized-steel construction |
| Поверхностная отделка | Mill-galvanized, brushed stainless steel or weather-resistant powder coat |
| Объединенный тип | Standing duct flanges, dual gasketed access doors and crank-compressed filter gasket |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Galvanized or 304 stainless steelGasket- or gel-seal filter rackTwo-inch prefilter trackChallenge injection and scan ports
Planning a Side-Access HEPA Filter Housing specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
