Three-quarter view of galvanized side-access HEPA filter housing

エアフィルターと化学ろ過

サイドアクセス HEPA フィルターハウジング

A duct-mounted cabinet with removable side doors and a positive-pressure clamping mechanism for servicing HEPA filters from either side.

Dual-Side Service
Positive Crank Seal
Integrated Prefilter Track
Welded Weatherproof Cabinet

見積もりリクエスト製品案内

商品紹介

This housing positions HEPA or ULPA filters perpendicular to the duct and allows them to slide in from either side. A crank or lever mechanism transfers force evenly to each filter gasket, producing a repeatable seal without access from the air face. Removable gasketed doors close both service openings, and an upstream track accepts a shallow prefilter. Standing flanges, pressure taps and challenge ports simplify integration into clean manufacturing and healthcare air systems.

主要な特徴

Dual access doors permit service from the side with safe working clearance.

A spring-loaded crank mechanism distributes sealing pressure across each filter row.

The separate prefilter track protects the absolute filter from coarse loading.

External pressure ports support differential-pressure monitoring without opening the cabinet.

お客様の製品に関する懸念事項

A ducted HEPA bank must be serviceable in a narrow plantroom while maintaining uniform gasket compression.

Only one side of the filter bank remains reachable after installation.Removable doors on both sides allow the usable service direction to be selected on site.

Hand-tightened clips apply unequal pressure around a large HEPA gasket.The crank mechanism applies coordinated sealing force across the filter row.

Coarse dust shortens expensive HEPA filter life.An integral prefilter track captures larger particles before the final filter.

A door seal leaks after repeated maintenance cycles.Square reinforced doors and high-memory perimeter gasketing maintain contact around the opening.

典型的な用途

Cleanroom air-handler final filtrationHospital supply and exhaust systemsPharmaceutical HVAC branchesLaboratory ventilationOutdoor equipment filter sections

技術的なパラメータ

Representative materials and dimensions for a ducted side-access HEPA housing are listed below.

コア材料	Welded galvanized or 304 stainless-steel cabinet with steel filter tracks and crank clamp
パネルの厚さ	1.5–2.0 mm all-welded housing panels
有効幅	365–3920 mm for half- to six-filter-wide assemblies
最大長さ	Up to 3920 mm bank length in modular multi-filter arrangements
鋼鉄の厚さを直面する	1.5–2.0 mm galvanized or 304 stainless steel
コア密度	Approximately 7850 kg/m³ for galvanized-steel cabinet components
熱伝導率	Approximately 45–60 W/(m·K) for galvanized-steel construction
表面仕上げ	Mill-galvanized, brushed stainless steel or weather-resistant powder coat
ジョイントタイプ	Standing duct flanges, dual gasketed access doors and crank-compressed filter gasket
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Galvanized or 304 stainless steelGasket- or gel-seal filter rackTwo-inch prefilter trackChallenge injection and scan ports

Planning a Side-Access HEPA Filter Housing specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する