Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Filtres à air et filtration chimique
Boîtier de filtre HEPA à accès latéral
A duct-mounted cabinet with removable side doors and a positive-pressure clamping mechanism for servicing HEPA filters from either side.
- Dual-Side Service
- Positive Crank Seal
- Integrated Prefilter Track
- Welded Weatherproof Cabinet
Introduction de produit
This housing positions HEPA or ULPA filters perpendicular to the duct and allows them to slide in from either side. A crank or lever mechanism transfers force evenly to each filter gasket, producing a repeatable seal without access from the air face. Removable gasketed doors close both service openings, and an upstream track accepts a shallow prefilter. Standing flanges, pressure taps and challenge ports simplify integration into clean manufacturing and healthcare air systems.
Key Features
A spring-loaded crank mechanism distributes sealing pressure across each filter row.
The separate prefilter track protects the absolute filter from coarse loading.
External pressure ports support differential-pressure monitoring without opening the cabinet.
Préoccupations du client produit
A ducted HEPA bank must be serviceable in a narrow plantroom while maintaining uniform gasket compression.
Only one side of the filter bank remains reachable after installation.Removable doors on both sides allow the usable service direction to be selected on site.
Hand-tightened clips apply unequal pressure around a large HEPA gasket.The crank mechanism applies coordinated sealing force across the filter row.
Coarse dust shortens expensive HEPA filter life.An integral prefilter track captures larger particles before the final filter.
A door seal leaks after repeated maintenance cycles.Square reinforced doors and high-memory perimeter gasketing maintain contact around the opening.
Les applications typiques
Cleanroom air-handler final filtrationHospital supply and exhaust systemsPharmaceutical HVAC branchesLaboratory ventilationOutdoor equipment filter sections
Paramètres techniques
Representative materials and dimensions for a ducted side-access HEPA housing are listed below.
| Matériaux de base | Welded galvanized or 304 stainless-steel cabinet with steel filter tracks and crank clamp |
|---|---|
| Panneau épaisseur | 1.5–2.0 mm all-welded housing panels |
| Largeur effective | 365–3920 mm for half- to six-filter-wide assemblies |
| Longueur maximale | Up to 3920 mm bank length in modular multi-filter arrangements |
| Acier face épaisseur | 1.5–2.0 mm galvanized or 304 stainless steel |
| Densité Core | Approximately 7850 kg/m³ for galvanized-steel cabinet components |
| Conductivité thermique | Approximately 45–60 W/(m·K) for galvanized-steel construction |
| surface finie | Mill-galvanized, brushed stainless steel or weather-resistant powder coat |
| Type joint | Standing duct flanges, dual gasketed access doors and crank-compressed filter gasket |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Galvanized or 304 stainless steelGasket- or gel-seal filter rackTwo-inch prefilter trackChallenge injection and scan ports
Planning a Side-Access HEPA Filter Housing specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
