Three-quarter view of galvanized side-access HEPA filter housing

공기 필터 및 화학 여과

Side - Access HEPA 필터 하우징

A duct-mounted cabinet with removable side doors and a positive-pressure clamping mechanism for servicing HEPA filters from either side.

Dual-Side Service
Positive Crank Seal
Integrated Prefilter Track
Welded Weatherproof Cabinet

견적 요청 제품 찾아보기

상품 소개

This housing positions HEPA or ULPA filters perpendicular to the duct and allows them to slide in from either side. A crank or lever mechanism transfers force evenly to each filter gasket, producing a repeatable seal without access from the air face. Removable gasketed doors close both service openings, and an upstream track accepts a shallow prefilter. Standing flanges, pressure taps and challenge ports simplify integration into clean manufacturing and healthcare air systems.

주요 기능

Dual access doors permit service from the side with safe working clearance.

A spring-loaded crank mechanism distributes sealing pressure across each filter row.

The separate prefilter track protects the absolute filter from coarse loading.

External pressure ports support differential-pressure monitoring without opening the cabinet.

고객 제품 관심사

A ducted HEPA bank must be serviceable in a narrow plantroom while maintaining uniform gasket compression.

Only one side of the filter bank remains reachable after installation.Removable doors on both sides allow the usable service direction to be selected on site.

Hand-tightened clips apply unequal pressure around a large HEPA gasket.The crank mechanism applies coordinated sealing force across the filter row.

Coarse dust shortens expensive HEPA filter life.An integral prefilter track captures larger particles before the final filter.

A door seal leaks after repeated maintenance cycles.Square reinforced doors and high-memory perimeter gasketing maintain contact around the opening.

일반적인 응용 프로그램

Cleanroom air-handler final filtrationHospital supply and exhaust systemsPharmaceutical HVAC branchesLaboratory ventilationOutdoor equipment filter sections

기술 매개변수

Representative materials and dimensions for a ducted side-access HEPA housing are listed below.

핵심 재료	Welded galvanized or 304 stainless-steel cabinet with steel filter tracks and crank clamp
패널 두께	1.5–2.0 mm all-welded housing panels
유효 폭	365–3920 mm for half- to six-filter-wide assemblies
최대 길이	Up to 3920 mm bank length in modular multi-filter arrangements
강철 면면 두께	1.5–2.0 mm galvanized or 304 stainless steel
코어 밀도	Approximately 7850 kg/m³ for galvanized-steel cabinet components
열전도도 (Thermal Conductivity)	Approximately 45–60 W/(m·K) for galvanized-steel construction
표면 마무리	Mill-galvanized, brushed stainless steel or weather-resistant powder coat
접합 유형	Standing duct flanges, dual gasketed access doors and crank-compressed filter gasket
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Galvanized or 304 stainless steelGasket- or gel-seal filter rackTwo-inch prefilter trackChallenge injection and scan ports

Planning a Side-Access HEPA Filter Housing specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.