Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Luftfilter und chemische Filtration
Side-Access HEPA-Filter - Gehäuse
A duct-mounted cabinet with removable side doors and a positive-pressure clamping mechanism for servicing HEPA filters from either side.
- Dual-Side Service
- Positive Crank Seal
- Integrated Prefilter Track
- Welded Weatherproof Cabinet
Produkteinführung
This housing positions HEPA or ULPA filters perpendicular to the duct and allows them to slide in from either side. A crank or lever mechanism transfers force evenly to each filter gasket, producing a repeatable seal without access from the air face. Removable gasketed doors close both service openings, and an upstream track accepts a shallow prefilter. Standing flanges, pressure taps and challenge ports simplify integration into clean manufacturing and healthcare air systems.
Key Features
A spring-loaded crank mechanism distributes sealing pressure across each filter row.
The separate prefilter track protects the absolute filter from coarse loading.
External pressure ports support differential-pressure monitoring without opening the cabinet.
Kunden Produktbedenken
A ducted HEPA bank must be serviceable in a narrow plantroom while maintaining uniform gasket compression.
Only one side of the filter bank remains reachable after installation.Removable doors on both sides allow the usable service direction to be selected on site.
Hand-tightened clips apply unequal pressure around a large HEPA gasket.The crank mechanism applies coordinated sealing force across the filter row.
Coarse dust shortens expensive HEPA filter life.An integral prefilter track captures larger particles before the final filter.
A door seal leaks after repeated maintenance cycles.Square reinforced doors and high-memory perimeter gasketing maintain contact around the opening.
Typische Anwendungen
Cleanroom air-handler final filtrationHospital supply and exhaust systemsPharmaceutical HVAC branchesLaboratory ventilationOutdoor equipment filter sections
Technische Parameter
Representative materials and dimensions for a ducted side-access HEPA housing are listed below.
| Core Material | Welded galvanized or 304 stainless-steel cabinet with steel filter tracks and crank clamp |
|---|---|
| Panel Dicke | 1.5–2.0 mm all-welded housing panels |
| Effektive Breite | 365–3920 mm for half- to six-filter-wide assemblies |
| Maximale Länge | Up to 3920 mm bank length in modular multi-filter arrangements |
| Stahl facing Dicke | 1.5–2.0 mm galvanized or 304 stainless steel |
| Kerndichte | Approximately 7850 kg/m³ for galvanized-steel cabinet components |
| Thermische Leitfähigkeit | Approximately 45–60 W/(m·K) for galvanized-steel construction |
| Oberfläche Finish | Mill-galvanized, brushed stainless steel or weather-resistant powder coat |
| Gemeinsamer Typ | Standing duct flanges, dual gasketed access doors and crank-compressed filter gasket |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Galvanized or 304 stainless steelGasket- or gel-seal filter rackTwo-inch prefilter trackChallenge injection and scan ports
Planning a Side-Access HEPA Filter Housing specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
