İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Endüstriye Özel Temiz Oda Ekipmanları
RABS Bariyer Sistemi
A modular stainless barrier that combines clear physical separation, glove access and HEPA unidirectional airflow around an aseptic filling or handling line.
- Controlled Physical Barrier
- HEPA First-Air Protection
- Interlocked Access Doors
- Retrofit-Ready Modules
Ürün tanıtımı
The restricted access barrier system surrounds an aseptic process with stainless posts, clear panels and monitored access doors while preserving integration with the filling conveyor. Unidirectional HEPA airflow protects the critical zone, and glove ports provide controlled intervention points. Modular wall, door and filter sections can be arranged around new or existing equipment, with transfer ports and door monitoring incorporated where required.
Ana Özellikler
Top-mounted HEPA modules provide unidirectional airflow over the critical process path.
Interlocked doors and defined glove ports control and document manual intervention.
Modular posts and panels adapt to conveyor, filler and retrofit geometries.
Müşteri Ürün Sorunları
Open filling lines expose critical product paths to operator movement and uncontrolled interventions even within a cleanroom.
Personnel movement can disturb first air and introduce contaminants.Clear barriers and fixed glove ports physically separate operators from the process path.
Uncontrolled door opening compromises the protected zone.Monitored interlocks restrict access and record defined interventions.
Existing machinery has irregular access and conveyor geometry.Modular frames, panels and pass-throughs are configured around the installed equipment.
Materials need controlled entry without opening large doors.Rapid transfer ports or dedicated small transfer interfaces support localized introduction.
Tipik uygulamalar
Aseptic vial and syringe fillingStoppering and capping linesSterile component handlingRetrofit protection for existing filling equipment
Teknik parametreler
Typical construction values for a modular pharmaceutical RABS are listed below.
| Temel malzemeler | 316L stainless steel framework with laminated safety-glass or clear polymer barrier panels |
|---|---|
| Panel kalınlığı | 8-15 mm transparent barrier panels |
| Effective Width (Etkili Genişlik) | 1200-3000 mm protected process width |
| Maksimum uzunluk | Up to 12000 mm modular line length |
| Çelik yüz yüze kalınlığı | 1.2-1.5 mm stainless cladding and service panels |
| Core Density (Çekirdek Yoğunluğu) | 2400-2500 kg/m³ for safety-glass barrier panels |
| Termal İletkenlik | 0.8-1.0 W/(m·K) for laminated glass panels |
| Yüzey bitirme | Satin stainless steel with flush clear barriers and cleanable seals |
| Ortak tip | Bolted modular stainless frame with gasketed interlocked doors, sealed HEPA plenums and conveyor pass-through interfaces |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Open or closed RABS configurationActive or passive HEPA airflowRapid transfer and aseptic liquid portsDoor monitoring, PLC and audit trail
Planning a RABS Barrier System specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
