Restricted access barrier system complete three-quarter view around an aseptic filling line

Peralatan Bilik Bersih Spesifik Industri

Sistem Penghalang RABS

A modular stainless barrier that combines clear physical separation, glove access and HEPA unidirectional airflow around an aseptic filling or handling line.

Controlled Physical Barrier
HEPA First-Air Protection
Interlocked Access Doors
Retrofit-Ready Modules

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The restricted access barrier system surrounds an aseptic process with stainless posts, clear panels and monitored access doors while preserving integration with the filling conveyor. Unidirectional HEPA airflow protects the critical zone, and glove ports provide controlled intervention points. Modular wall, door and filter sections can be arranged around new or existing equipment, with transfer ports and door monitoring incorporated where required.

Ciri-ciri Utama

Clear fixed barriers separate personnel from exposed product while retaining process visibility.

Top-mounted HEPA modules provide unidirectional airflow over the critical process path.

Interlocked doors and defined glove ports control and document manual intervention.

Modular posts and panels adapt to conveyor, filler and retrofit geometries.

Kebimbangan Produk Pelanggan

Open filling lines expose critical product paths to operator movement and uncontrolled interventions even within a cleanroom.

Personnel movement can disturb first air and introduce contaminants.Clear barriers and fixed glove ports physically separate operators from the process path.

Uncontrolled door opening compromises the protected zone.Monitored interlocks restrict access and record defined interventions.

Existing machinery has irregular access and conveyor geometry.Modular frames, panels and pass-throughs are configured around the installed equipment.

Materials need controlled entry without opening large doors.Rapid transfer ports or dedicated small transfer interfaces support localized introduction.

Permohonan yang biasa

Aseptic vial and syringe fillingStoppering and capping linesSterile component handlingRetrofit protection for existing filling equipment

Parameter teknikal

Typical construction values for a modular pharmaceutical RABS are listed below.

Bahan Teras	316L stainless steel framework with laminated safety-glass or clear polymer barrier panels
Ketebalan Panel	8-15 mm transparent barrier panels
Lebar berkesan	1200-3000 mm protected process width
Panjang maksimum	Up to 12000 mm modular line length
Keluli Menghadapi Ketebalan	1.2-1.5 mm stainless cladding and service panels
Ketumpatan teras	2400-2500 kg/m³ for safety-glass barrier panels
Kekonduksian Terma	0.8-1.0 W/(m·K) for laminated glass panels
Kemasan permukaan	Satin stainless steel with flush clear barriers and cleanable seals
Jenis Bersatu	Bolted modular stainless frame with gasketed interlocked doors, sealed HEPA plenums and conveyor pass-through interfaces
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Open or closed RABS configurationActive or passive HEPA airflowRapid transfer and aseptic liquid portsDoor monitoring, PLC and audit trail

Planning a RABS Barrier System specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami