Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Peralatan Cleanroom Spesifik Industri
Sistem penghalang RABS
A modular stainless barrier that combines clear physical separation, glove access and HEPA unidirectional airflow around an aseptic filling or handling line.
- Controlled Physical Barrier
- HEPA First-Air Protection
- Interlocked Access Doors
- Retrofit-Ready Modules
Perkenalan produk
The restricted access barrier system surrounds an aseptic process with stainless posts, clear panels and monitored access doors while preserving integration with the filling conveyor. Unidirectional HEPA airflow protects the critical zone, and glove ports provide controlled intervention points. Modular wall, door and filter sections can be arranged around new or existing equipment, with transfer ports and door monitoring incorporated where required.
Fitur utama:
Top-mounted HEPA modules provide unidirectional airflow over the critical process path.
Interlocked doors and defined glove ports control and document manual intervention.
Modular posts and panels adapt to conveyor, filler and retrofit geometries.
Kekhawatiran produk pelanggan
Open filling lines expose critical product paths to operator movement and uncontrolled interventions even within a cleanroom.
Personnel movement can disturb first air and introduce contaminants.Clear barriers and fixed glove ports physically separate operators from the process path.
Uncontrolled door opening compromises the protected zone.Monitored interlocks restrict access and record defined interventions.
Existing machinery has irregular access and conveyor geometry.Modular frames, panels and pass-throughs are configured around the installed equipment.
Materials need controlled entry without opening large doors.Rapid transfer ports or dedicated small transfer interfaces support localized introduction.
Aplikasi yang Tipis
Aseptic vial and syringe fillingStoppering and capping linesSterile component handlingRetrofit protection for existing filling equipment
Parameter teknis
Typical construction values for a modular pharmaceutical RABS are listed below.
| Bahan inti | 316L stainless steel framework with laminated safety-glass or clear polymer barrier panels |
|---|---|
| Ketebalan Panel (Panel Thickness) | 8-15 mm transparent barrier panels |
| Efektif lebar | 1200-3000 mm protected process width |
| Panjang maksimum | Up to 12000 mm modular line length |
| Baja menghadap ketebalan | 1.2-1.5 mm stainless cladding and service panels |
| Kepadatan inti (core density) | 2400-2500 kg/m³ for safety-glass barrier panels |
| Konduktivitas Termal (Thermal Conductivity) | 0.8-1.0 W/(m·K) for laminated glass panels |
| Permukaan selesai | Satin stainless steel with flush clear barriers and cleanable seals |
| Jenis Bersama | Bolted modular stainless frame with gasketed interlocked doors, sealed HEPA plenums and conveyor pass-through interfaces |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Open or closed RABS configurationActive or passive HEPA airflowRapid transfer and aseptic liquid portsDoor monitoring, PLC and audit trail
Planning a RABS Barrier System specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
