Restricted access barrier system complete three-quarter view around an aseptic filling line

산업별 클린룸 장비

RABS 장벽 시스템

A modular stainless barrier that combines clear physical separation, glove access and HEPA unidirectional airflow around an aseptic filling or handling line.

Controlled Physical Barrier
HEPA First-Air Protection
Interlocked Access Doors
Retrofit-Ready Modules

견적 요청 제품 찾아보기

상품 소개

The restricted access barrier system surrounds an aseptic process with stainless posts, clear panels and monitored access doors while preserving integration with the filling conveyor. Unidirectional HEPA airflow protects the critical zone, and glove ports provide controlled intervention points. Modular wall, door and filter sections can be arranged around new or existing equipment, with transfer ports and door monitoring incorporated where required.

주요 기능

Clear fixed barriers separate personnel from exposed product while retaining process visibility.

Top-mounted HEPA modules provide unidirectional airflow over the critical process path.

Interlocked doors and defined glove ports control and document manual intervention.

Modular posts and panels adapt to conveyor, filler and retrofit geometries.

고객 제품 관심사

Open filling lines expose critical product paths to operator movement and uncontrolled interventions even within a cleanroom.

Personnel movement can disturb first air and introduce contaminants.Clear barriers and fixed glove ports physically separate operators from the process path.

Uncontrolled door opening compromises the protected zone.Monitored interlocks restrict access and record defined interventions.

Existing machinery has irregular access and conveyor geometry.Modular frames, panels and pass-throughs are configured around the installed equipment.

Materials need controlled entry without opening large doors.Rapid transfer ports or dedicated small transfer interfaces support localized introduction.

일반적인 응용 프로그램

Aseptic vial and syringe fillingStoppering and capping linesSterile component handlingRetrofit protection for existing filling equipment

기술 매개변수

Typical construction values for a modular pharmaceutical RABS are listed below.

핵심 재료	316L stainless steel framework with laminated safety-glass or clear polymer barrier panels
패널 두께	8-15 mm transparent barrier panels
유효 폭	1200-3000 mm protected process width
최대 길이	Up to 12000 mm modular line length
강철 면면 두께	1.2-1.5 mm stainless cladding and service panels
코어 밀도	2400-2500 kg/m³ for safety-glass barrier panels
열전도도 (Thermal Conductivity)	0.8-1.0 W/(m·K) for laminated glass panels
표면 마무리	Satin stainless steel with flush clear barriers and cleanable seals
접합 유형	Bolted modular stainless frame with gasketed interlocked doors, sealed HEPA plenums and conveyor pass-through interfaces
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Open or closed RABS configurationActive or passive HEPA airflowRapid transfer and aseptic liquid portsDoor monitoring, PLC and audit trail

Planning a RABS Barrier System specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.