Operasyon Odası Surgical Scrub Sink
- Two Independent Wash Stations
- Infrared Water Activation
- Knee-Control Manual Backup
- Deep Fully Draining Basins
Ürün tanıtımı
The operating room surgical scrub sink is fabricated as one welded 304 stainless steel assembly with two separate deep basins, a tall integral backsplash and a centered splash divider. Each station has its own high-mounted gooseneck outlet, infrared sensor, stainless soap spout, drain and front knee-control panel. Smooth radiused basin transitions direct water toward the outlets, while the continuous rear mounting rail and paired triangular supports transfer the suspended load to a prepared wall structure. The satin No. 4 finish provides a cleanable clinical surface without decorative coatings.
Ana Özellikler
Black infrared sensor windows initiate water flow without hand contact at either station.
Hinged knee panels provide a mechanical backup path and open for access to the concealed valve linkage.
A tall backsplash and center divider contain splash while the sloped basin floors reduce residual pooling.
Müşteri Ürün Sorunları
A surgical wash station must support simultaneous hands-free use while controlling splash, draining promptly and keeping service components accessible outside the basin.
Tipik uygulamalar
Teknik parametreler
Typical configurable construction values for a wall-mounted dual-station stainless surgical scrub sink are listed below.
| Temel malzemeler | Welded AISI 304 stainless steel basin, backsplash, divider, apron and wall-support structure |
|---|---|
| Panel kalınlığı | 250-320 mm formed basin and front-apron section |
| Effective Width (Etkili Genişlik) | 1450-1626 mm usable dual-station sink width |
| Maksimum uzunluk | Up to 1800 mm configurable overall sink length |
| Çelik yüz yüze kalınlığı | 1.2-1.5 mm formed AISI 304 stainless sheet |
| Core Density (Çekirdek Yoğunluğu) | 7900 kg/m³ for AISI 304 stainless steel |
| Termal İletkenlik | 15 W/(m·K) for AISI 304 stainless steel at room temperature |
| Yüzey bitirme | Neutral satin No. 4 brushed stainless steel with smooth welded and radiused basin transitions |
| Ortak tip | Continuously welded basin and backsplash with a rear Z mounting rail, two triangular supports and serviceable hinged knee panels |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Planning a Operating Room Surgical Scrub Sink specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca