Phòng mổ Phẫu thuật Scrub Sink
- Two Independent Wash Stations
- Infrared Water Activation
- Knee-Control Manual Backup
- Deep Fully Draining Basins
Giới thiệu Sản phẩm
The operating room surgical scrub sink is fabricated as one welded 304 stainless steel assembly with two separate deep basins, a tall integral backsplash and a centered splash divider. Each station has its own high-mounted gooseneck outlet, infrared sensor, stainless soap spout, drain and front knee-control panel. Smooth radiused basin transitions direct water toward the outlets, while the continuous rear mounting rail and paired triangular supports transfer the suspended load to a prepared wall structure. The satin No. 4 finish provides a cleanable clinical surface without decorative coatings.
Các tính năng chính
Black infrared sensor windows initiate water flow without hand contact at either station.
Hinged knee panels provide a mechanical backup path and open for access to the concealed valve linkage.
A tall backsplash and center divider contain splash while the sloped basin floors reduce residual pooling.
Các mối quan tâm về sản phẩm của khách hàng
A surgical wash station must support simultaneous hands-free use while controlling splash, draining promptly and keeping service components accessible outside the basin.
Các ứng dụng điển hình
Thông số kỹ thuật
Typical configurable construction values for a wall-mounted dual-station stainless surgical scrub sink are listed below.
| Vật liệu lõi | Welded AISI 304 stainless steel basin, backsplash, divider, apron and wall-support structure |
|---|---|
| Độ dày bảng điều khiển | 250-320 mm formed basin and front-apron section |
| Chiều rộng hiệu quả | 1450-1626 mm usable dual-station sink width |
| Chiều dài tối đa | Up to 1800 mm configurable overall sink length |
| Thép đối mặt với độ dày | 1.2-1.5 mm formed AISI 304 stainless sheet |
| Mật độ lõi | 7900 kg/m³ for AISI 304 stainless steel |
| Độ dẫn nhiệt | 15 W/(m·K) for AISI 304 stainless steel at room temperature |
| Kết thúc bề mặt | Neutral satin No. 4 brushed stainless steel with smooth welded and radiused basin transitions |
| Loại khớp nối | Continuously welded basin and backsplash with a rear Z mounting rail, two triangular supports and serviceable hinged knee panels |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Các tùy chọn có sẵn
Planning a Operating Room Surgical Scrub Sink specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại