Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Peralatan Cleanroom Spesifik Industri
Ruang Operasi Surgical Scrub Sink
A wall-mounted dual-station surgical scrub sink with two deep sloping basins, touch-free water activation and knee-operated manual backup for controlled preoperative hand washing.
- Two Independent Wash Stations
- Infrared Water Activation
- Knee-Control Manual Backup
- Deep Fully Draining Basins
Perkenalan produk
The operating room surgical scrub sink is fabricated as one welded 304 stainless steel assembly with two separate deep basins, a tall integral backsplash and a centered splash divider. Each station has its own high-mounted gooseneck outlet, infrared sensor, stainless soap spout, drain and front knee-control panel. Smooth radiused basin transitions direct water toward the outlets, while the continuous rear mounting rail and paired triangular supports transfer the suspended load to a prepared wall structure. The satin No. 4 finish provides a cleanable clinical surface without decorative coatings.
Fitur utama:
Black infrared sensor windows initiate water flow without hand contact at either station.
Hinged knee panels provide a mechanical backup path and open for access to the concealed valve linkage.
A tall backsplash and center divider contain splash while the sloped basin floors reduce residual pooling.
Kekhawatiran produk pelanggan
A surgical wash station must support simultaneous hands-free use while controlling splash, draining promptly and keeping service components accessible outside the basin.
Hand-operated taps can recontaminate scrubbed hands at the end of the washing sequence.Each station uses an infrared water sensor, with a broad knee panel available for contact-free manual actuation.
A shallow or flat-bottomed sink can splash outward and retain water between users.Deep separate bowls, high rear shielding and sloped floors direct runoff toward one drain per station.
Two users working side by side can transfer spray into the adjacent wash position.The fixed center divider separates the two basin openings without obstructing either gooseneck outlet.
Concealed mixing and control hardware can be difficult to inspect after wall mounting.Hinged front knee panels expose the compact station valve and linkage while the basin remains fixed to its supports.
Aplikasi yang Tipis
Operating theatre scrub alcovesSurgical-suite clean corridorsCentral sterile service preparation zonesHospital procedure-room wash areas
Parameter teknis
Typical configurable construction values for a wall-mounted dual-station stainless surgical scrub sink are listed below.
| Bahan inti | Welded AISI 304 stainless steel basin, backsplash, divider, apron and wall-support structure |
|---|---|
| Ketebalan Panel (Panel Thickness) | 250-320 mm formed basin and front-apron section |
| Efektif lebar | 1450-1626 mm usable dual-station sink width |
| Panjang maksimum | Up to 1800 mm configurable overall sink length |
| Baja menghadap ketebalan | 1.2-1.5 mm formed AISI 304 stainless sheet |
| Kepadatan inti (core density) | 7900 kg/m³ for AISI 304 stainless steel |
| Konduktivitas Termal (Thermal Conductivity) | 15 W/(m·K) for AISI 304 stainless steel at room temperature |
| Permukaan selesai | Neutral satin No. 4 brushed stainless steel with smooth welded and radiused basin transitions |
| Jenis Bersama | Continuously welded basin and backsplash with a rear Z mounting rail, two triangular supports and serviceable hinged knee panels |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Single-, dual- or triple-station configurationsInfrared-only or infrared-with-knee-backup water controlLaminar-flow or rose-spray outlet headsDigital scrub timers and alternative soap-delivery arrangements
Planning a Operating Room Surgical Scrub Sink specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
