Complete dual-station operating room surgical scrub sink in front-right-top view with two basins and infrared controls

산업별 클린룸 장비

수술실 Scrub Sink

A wall-mounted dual-station surgical scrub sink with two deep sloping basins, touch-free water activation and knee-operated manual backup for controlled preoperative hand washing.

Two Independent Wash Stations
Infrared Water Activation
Knee-Control Manual Backup
Deep Fully Draining Basins

견적 요청 제품 찾아보기

상품 소개

The operating room surgical scrub sink is fabricated as one welded 304 stainless steel assembly with two separate deep basins, a tall integral backsplash and a centered splash divider. Each station has its own high-mounted gooseneck outlet, infrared sensor, stainless soap spout, drain and front knee-control panel. Smooth radiused basin transitions direct water toward the outlets, while the continuous rear mounting rail and paired triangular supports transfer the suspended load to a prepared wall structure. The satin No. 4 finish provides a cleanable clinical surface without decorative coatings.

주요 기능

Two individually drained basins allow adjacent users to scrub without sharing one standing-water area.

Black infrared sensor windows initiate water flow without hand contact at either station.

Hinged knee panels provide a mechanical backup path and open for access to the concealed valve linkage.

A tall backsplash and center divider contain splash while the sloped basin floors reduce residual pooling.

고객 제품 관심사

A surgical wash station must support simultaneous hands-free use while controlling splash, draining promptly and keeping service components accessible outside the basin.

Hand-operated taps can recontaminate scrubbed hands at the end of the washing sequence.Each station uses an infrared water sensor, with a broad knee panel available for contact-free manual actuation.

A shallow or flat-bottomed sink can splash outward and retain water between users.Deep separate bowls, high rear shielding and sloped floors direct runoff toward one drain per station.

Two users working side by side can transfer spray into the adjacent wash position.The fixed center divider separates the two basin openings without obstructing either gooseneck outlet.

Concealed mixing and control hardware can be difficult to inspect after wall mounting.Hinged front knee panels expose the compact station valve and linkage while the basin remains fixed to its supports.

일반적인 응용 프로그램

Operating theatre scrub alcovesSurgical-suite clean corridorsCentral sterile service preparation zonesHospital procedure-room wash areas

기술 매개변수

Typical configurable construction values for a wall-mounted dual-station stainless surgical scrub sink are listed below.

핵심 재료	Welded AISI 304 stainless steel basin, backsplash, divider, apron and wall-support structure
패널 두께	250-320 mm formed basin and front-apron section
유효 폭	1450-1626 mm usable dual-station sink width
최대 길이	Up to 1800 mm configurable overall sink length
강철 면면 두께	1.2-1.5 mm formed AISI 304 stainless sheet
코어 밀도	7900 kg/m³ for AISI 304 stainless steel
열전도도 (Thermal Conductivity)	15 W/(m·K) for AISI 304 stainless steel at room temperature
표면 마무리	Neutral satin No. 4 brushed stainless steel with smooth welded and radiused basin transitions
접합 유형	Continuously welded basin and backsplash with a rear Z mounting rail, two triangular supports and serviceable hinged knee panels
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single-, dual- or triple-station configurationsInfrared-only or infrared-with-knee-backup water controlLaminar-flow or rose-spray outlet headsDigital scrub timers and alternative soap-delivery arrangements

Planning a Operating Room Surgical Scrub Sink specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.