ห้องผ่าตัดอ่างล้างหน้าขัดผ่าตัด
- Two Independent Wash Stations
- Infrared Water Activation
- Knee-Control Manual Backup
- Deep Fully Draining Basins
การแนะนําสินค้า
The operating room surgical scrub sink is fabricated as one welded 304 stainless steel assembly with two separate deep basins, a tall integral backsplash and a centered splash divider. Each station has its own high-mounted gooseneck outlet, infrared sensor, stainless soap spout, drain and front knee-control panel. Smooth radiused basin transitions direct water toward the outlets, while the continuous rear mounting rail and paired triangular supports transfer the suspended load to a prepared wall structure. The satin No. 4 finish provides a cleanable clinical surface without decorative coatings.
คุณสมบัติที่สําคัญ
Black infrared sensor windows initiate water flow without hand contact at either station.
Hinged knee panels provide a mechanical backup path and open for access to the concealed valve linkage.
A tall backsplash and center divider contain splash while the sloped basin floors reduce residual pooling.
ความกังวลของลูกค้าเกี่ยวกับผลิตภัณฑ์
A surgical wash station must support simultaneous hands-free use while controlling splash, draining promptly and keeping service components accessible outside the basin.
การใช้งานทั่วไป
พารามิเตอร์ทางเทคนิค
Typical configurable construction values for a wall-mounted dual-station stainless surgical scrub sink are listed below.
| วัสดุหลัก | Welded AISI 304 stainless steel basin, backsplash, divider, apron and wall-support structure |
|---|---|
| ความหนาของแผง | 250-320 mm formed basin and front-apron section |
| ความกว้างที่มีประสิทธิภาพ | 1450-1626 mm usable dual-station sink width |
| ความยาวสูงสุด | Up to 1800 mm configurable overall sink length |
| ความหนาของเหล็กหันหน้า | 1.2-1.5 mm formed AISI 304 stainless sheet |
| ความหนาแน่นหลัก | 7900 kg/m³ for AISI 304 stainless steel |
| การนําความร้อน | 15 W/(m·K) for AISI 304 stainless steel at room temperature |
| เสร็จสิ้นพื้นผิว | Neutral satin No. 4 brushed stainless steel with smooth welded and radiused basin transitions |
| ประเภทร่วม | Continuously welded basin and backsplash with a rear Z mounting rail, two triangular supports and serviceable hinged knee panels |
| การปรับแต่ง | สามารถใช้ได้ตามแอปพลิเคชันที่ตั้งใจไว้และสภาพแวดล้อมการทํางาน |
ตัวเลือกที่มีอยู่
Planning a Operating Room Surgical Scrub Sink specification?
ส่งมิติของคุณเงื่อนไขการติดตั้งเป้าหมายประสิทธิภาพและผิวที่ต้องการ

ภาษาอังกฤษ
ภาษาเยอรมัน
ภาษาอาหรับ
ฝรั่งเศส
ภาษาอินโดนีเซีย
ภาษาญี่ปุ่น
ภาษาเกาหลี
ภาษามาเลย์
ภาษาโปรตุเกส
ภาษารัสเซีย
ภาษาสเปน
ภาษาไทยปัจจุบัน
ภาษาตุรกี
ภาษาเวียดนาม