İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda HVAC ve Hava İşleme Ekipmanları
Sıcak su dolaşım pompası
A compact vertical in-line centrifugal pump that maintains heating-water flow through AHU coils, reheat circuits and hydronic terminal branches.
- In-Line Pipe Installation
- Compact Plantroom Footprint
- Efficient Vertical Motor
- Serviceable Pump Cartridge
Ürün tanıtımı
The vertical in-line pump places suction and discharge flanges on a common centerline so it can be installed directly in a heating-water header. A close-coupled motor and removable rotating cartridge reduce floor space compared with base-mounted equipment. The cast-iron body and mechanical seal are selected for closed hydronic water, while optional speed control maintains differential pressure as control valves modulate.
Ana Özellikler
Vertical motor placement uses little floor area and keeps the rotating assembly accessible from above.
A removable cartridge permits motor, coupling and seal service without removing the pump body from pipework.
Integrated variable-speed control can maintain pressure, temperature differential or scheduled circulation.
Müşteri Ürün Sorunları
Heating loops need dependable circulation in crowded plantrooms without excessive pressure or standby heat loss.
A base-mounted pump consumes valuable mechanical-room floor space.The in-line body supports a vertical motor directly above the pipe centerline.
Constant flow creates valve noise when many zones close.Speed control reduces pump head as heating demand falls.
Seal maintenance normally requires draining and cutting the header.The top pull-out cartridge leaves the flanged red pump body installed.
Hot water transfers heat into nearby electrical components.A ventilated coupling section separates the motor from the hot volute.
Tipik uygulamalar
Cleanroom AHU hot-water coilsTerminal reheat loopsHospital heating-water branchesLaboratory perimeter heatingHeat-recovery circulation circuits
Teknik parametreler
Common physical ranges for a commercial vertical in-line hydronic pump are shown below.
| Temel malzemeler | Cast-iron in-line body with stainless shaft and bronze or stainless impeller |
|---|---|
| Panel kalınlığı | 6-12 mm integral mounting-foot and motor-bracket thickness |
| Effective Width (Etkili Genişlik) | 200-650 mm flange-to-flange width |
| Maksimum uzunluk | Up to 1600 mm overall pump-and-motor plan length |
| Çelik yüz yüze kalınlığı | 1.2-2.0 mm perforated coupling guard |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7000-7300 kg/m³ for cast-iron in-line pump-body material |
| Termal İletkenlik | Approximately 45-55 W/(m·K) for cast-iron pump body |
| Yüzey bitirme | Heat-resistant red epoxy coating with passivated fasteners |
| Ortak tip | Equal in-line flanged ports with close-coupled removable motor cartridge |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Single-head or twin-head pumpIntegrated variable-speed motorBronze or stainless impellerMechanical-seal combinations for glycol and elevated temperature
Planning a Hot-Water Circulation Pump specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
