Red vertical in-line hot-water circulation pump

클린룸 HVAC 및 공기 처리 장비

뜨거운 물 순환 펌프

A compact vertical in-line centrifugal pump that maintains heating-water flow through AHU coils, reheat circuits and hydronic terminal branches.

In-Line Pipe Installation
Compact Plantroom Footprint
Efficient Vertical Motor
Serviceable Pump Cartridge

견적 요청 제품 찾아보기

상품 소개

The vertical in-line pump places suction and discharge flanges on a common centerline so it can be installed directly in a heating-water header. A close-coupled motor and removable rotating cartridge reduce floor space compared with base-mounted equipment. The cast-iron body and mechanical seal are selected for closed hydronic water, while optional speed control maintains differential pressure as control valves modulate.

주요 기능

Equal in-line flanges simplify connection to straight horizontal supply or return headers.

Vertical motor placement uses little floor area and keeps the rotating assembly accessible from above.

A removable cartridge permits motor, coupling and seal service without removing the pump body from pipework.

Integrated variable-speed control can maintain pressure, temperature differential or scheduled circulation.

고객 제품 관심사

Heating loops need dependable circulation in crowded plantrooms without excessive pressure or standby heat loss.

A base-mounted pump consumes valuable mechanical-room floor space.The in-line body supports a vertical motor directly above the pipe centerline.

Constant flow creates valve noise when many zones close.Speed control reduces pump head as heating demand falls.

Seal maintenance normally requires draining and cutting the header.The top pull-out cartridge leaves the flanged red pump body installed.

Hot water transfers heat into nearby electrical components.A ventilated coupling section separates the motor from the hot volute.

일반적인 응용 프로그램

Cleanroom AHU hot-water coilsTerminal reheat loopsHospital heating-water branchesLaboratory perimeter heatingHeat-recovery circulation circuits

기술 매개변수

Common physical ranges for a commercial vertical in-line hydronic pump are shown below.

핵심 재료	Cast-iron in-line body with stainless shaft and bronze or stainless impeller
패널 두께	6-12 mm integral mounting-foot and motor-bracket thickness
유효 폭	200-650 mm flange-to-flange width
최대 길이	Up to 1600 mm overall pump-and-motor plan length
강철 면면 두께	1.2-2.0 mm perforated coupling guard
코어 밀도	Approximately 7000-7300 kg/m³ for cast-iron in-line pump-body material
열전도도 (Thermal Conductivity)	Approximately 45-55 W/(m·K) for cast-iron pump body
표면 마무리	Heat-resistant red epoxy coating with passivated fasteners
접합 유형	Equal in-line flanged ports with close-coupled removable motor cartridge
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single-head or twin-head pumpIntegrated variable-speed motorBronze or stainless impellerMechanical-seal combinations for glycol and elevated temperature

Planning a Hot-Water Circulation Pump specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.