Red vertical in-line hot-water circulation pump

クリーンルーム HVAC および空気処理装置

熱水循環ポンプ

A compact vertical in-line centrifugal pump that maintains heating-water flow through AHU coils, reheat circuits and hydronic terminal branches.

In-Line Pipe Installation
Compact Plantroom Footprint
Efficient Vertical Motor
Serviceable Pump Cartridge

見積もりリクエスト製品案内

商品紹介

The vertical in-line pump places suction and discharge flanges on a common centerline so it can be installed directly in a heating-water header. A close-coupled motor and removable rotating cartridge reduce floor space compared with base-mounted equipment. The cast-iron body and mechanical seal are selected for closed hydronic water, while optional speed control maintains differential pressure as control valves modulate.

主要な特徴

Equal in-line flanges simplify connection to straight horizontal supply or return headers.

Vertical motor placement uses little floor area and keeps the rotating assembly accessible from above.

A removable cartridge permits motor, coupling and seal service without removing the pump body from pipework.

Integrated variable-speed control can maintain pressure, temperature differential or scheduled circulation.

お客様の製品に関する懸念事項

Heating loops need dependable circulation in crowded plantrooms without excessive pressure or standby heat loss.

A base-mounted pump consumes valuable mechanical-room floor space.The in-line body supports a vertical motor directly above the pipe centerline.

Constant flow creates valve noise when many zones close.Speed control reduces pump head as heating demand falls.

Seal maintenance normally requires draining and cutting the header.The top pull-out cartridge leaves the flanged red pump body installed.

Hot water transfers heat into nearby electrical components.A ventilated coupling section separates the motor from the hot volute.

典型的な用途

Cleanroom AHU hot-water coilsTerminal reheat loopsHospital heating-water branchesLaboratory perimeter heatingHeat-recovery circulation circuits

技術的なパラメータ

Common physical ranges for a commercial vertical in-line hydronic pump are shown below.

コア材料	Cast-iron in-line body with stainless shaft and bronze or stainless impeller
パネルの厚さ	6-12 mm integral mounting-foot and motor-bracket thickness
有効幅	200-650 mm flange-to-flange width
最大長さ	Up to 1600 mm overall pump-and-motor plan length
鋼鉄の厚さを直面する	1.2-2.0 mm perforated coupling guard
コア密度	Approximately 7000-7300 kg/m³ for cast-iron in-line pump-body material
熱伝導率	Approximately 45-55 W/(m·K) for cast-iron pump body
表面仕上げ	Heat-resistant red epoxy coating with passivated fasteners
ジョイントタイプ	Equal in-line flanged ports with close-coupled removable motor cartridge
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single-head or twin-head pumpIntegrated variable-speed motorBronze or stainless impellerMechanical-seal combinations for glycol and elevated temperature

Planning a Hot-Water Circulation Pump specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する