Red vertical in-line hot-water circulation pump

Reinraum HVAC und Luftbehandlung Ausrüstung

Warmwasser-Zirkulationspumpe

A compact vertical in-line centrifugal pump that maintains heating-water flow through AHU coils, reheat circuits and hydronic terminal branches.

In-Line Pipe Installation
Compact Plantroom Footprint
Efficient Vertical Motor
Serviceable Pump Cartridge

Bitte senden Sie eine Anfrage. Browse Produkte

Produkteinführung

The vertical in-line pump places suction and discharge flanges on a common centerline so it can be installed directly in a heating-water header. A close-coupled motor and removable rotating cartridge reduce floor space compared with base-mounted equipment. The cast-iron body and mechanical seal are selected for closed hydronic water, while optional speed control maintains differential pressure as control valves modulate.

Key Features

Equal in-line flanges simplify connection to straight horizontal supply or return headers.

Vertical motor placement uses little floor area and keeps the rotating assembly accessible from above.

A removable cartridge permits motor, coupling and seal service without removing the pump body from pipework.

Integrated variable-speed control can maintain pressure, temperature differential or scheduled circulation.

Kunden Produktbedenken

Heating loops need dependable circulation in crowded plantrooms without excessive pressure or standby heat loss.

A base-mounted pump consumes valuable mechanical-room floor space.The in-line body supports a vertical motor directly above the pipe centerline.

Constant flow creates valve noise when many zones close.Speed control reduces pump head as heating demand falls.

Seal maintenance normally requires draining and cutting the header.The top pull-out cartridge leaves the flanged red pump body installed.

Hot water transfers heat into nearby electrical components.A ventilated coupling section separates the motor from the hot volute.

Typische Anwendungen

Cleanroom AHU hot-water coilsTerminal reheat loopsHospital heating-water branchesLaboratory perimeter heatingHeat-recovery circulation circuits

Technische Parameter

Common physical ranges for a commercial vertical in-line hydronic pump are shown below.

Core Material	Cast-iron in-line body with stainless shaft and bronze or stainless impeller
Panel Dicke	6-12 mm integral mounting-foot and motor-bracket thickness
Effektive Breite	200-650 mm flange-to-flange width
Maximale Länge	Up to 1600 mm overall pump-and-motor plan length
Stahl facing Dicke	1.2-2.0 mm perforated coupling guard
Kerndichte	Approximately 7000-7300 kg/m³ for cast-iron in-line pump-body material
Thermische Leitfähigkeit	Approximately 45-55 W/(m·K) for cast-iron pump body
Oberfläche Finish	Heat-resistant red epoxy coating with passivated fasteners
Gemeinsamer Typ	Equal in-line flanged ports with close-coupled removable motor cartridge
Customisierung	Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung.

Verfügbare Optionen

Single-head or twin-head pumpIntegrated variable-speed motorBronze or stainless impellerMechanical-seal combinations for glycol and elevated temperature

Planning a Hot-Water Circulation Pump specification?

Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.

Sprechen Sie mit unserem Team