Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de HVAC y manejo de aire para salas limpias
Bomba de circulación de agua caliente
A compact vertical in-line centrifugal pump that maintains heating-water flow through AHU coils, reheat circuits and hydronic terminal branches.
- In-Line Pipe Installation
- Compact Plantroom Footprint
- Efficient Vertical Motor
- Serviceable Pump Cartridge
Introducción del producto
The vertical in-line pump places suction and discharge flanges on a common centerline so it can be installed directly in a heating-water header. A close-coupled motor and removable rotating cartridge reduce floor space compared with base-mounted equipment. The cast-iron body and mechanical seal are selected for closed hydronic water, while optional speed control maintains differential pressure as control valves modulate.
Características clave
Vertical motor placement uses little floor area and keeps the rotating assembly accessible from above.
A removable cartridge permits motor, coupling and seal service without removing the pump body from pipework.
Integrated variable-speed control can maintain pressure, temperature differential or scheduled circulation.
Preocupaciones del producto del cliente
Heating loops need dependable circulation in crowded plantrooms without excessive pressure or standby heat loss.
A base-mounted pump consumes valuable mechanical-room floor space.The in-line body supports a vertical motor directly above the pipe centerline.
Constant flow creates valve noise when many zones close.Speed control reduces pump head as heating demand falls.
Seal maintenance normally requires draining and cutting the header.The top pull-out cartridge leaves the flanged red pump body installed.
Hot water transfers heat into nearby electrical components.A ventilated coupling section separates the motor from the hot volute.
Aplicaciones típicas
Cleanroom AHU hot-water coilsTerminal reheat loopsHospital heating-water branchesLaboratory perimeter heatingHeat-recovery circulation circuits
Parámetros técnicos
Common physical ranges for a commercial vertical in-line hydronic pump are shown below.
| Materiales Core | Cast-iron in-line body with stainless shaft and bronze or stainless impeller |
|---|---|
| Panel de espesor | 6-12 mm integral mounting-foot and motor-bracket thickness |
| Ancho efectivo | 200-650 mm flange-to-flange width |
| Longitud máxima | Up to 1600 mm overall pump-and-motor plan length |
| Acero frente a espesor | 1.2-2.0 mm perforated coupling guard |
| Densidad Core | Approximately 7000-7300 kg/m³ for cast-iron in-line pump-body material |
| Conductividad térmica | Approximately 45-55 W/(m·K) for cast-iron pump body |
| Superficie acabada | Heat-resistant red epoxy coating with passivated fasteners |
| Tipo conjunto | Equal in-line flanged ports with close-coupled removable motor cartridge |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Single-head or twin-head pumpIntegrated variable-speed motorBronze or stainless impellerMechanical-seal combinations for glycol and elevated temperature
Planning a Hot-Water Circulation Pump specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
