İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kontrolü ve Çevre İzleme Sistemleri
FFU Grup Kontrol Sistemi
A networked controller that supervises large banks of fan filter units, distributes speed setpoints and identifies individual FFU faults from one operator panel.
- Individual FFU Addressing
- Grouped Speed Commands
- Live Motor Feedback
- Fault Location by Unit
Ürün tanıtımı
The FFU group control system connects individually addressed EC fan filter units through dedicated communication branches and industrial gateways. Operators can start, stop or change speed by room, zone or selected unit while receiving actual speed, current and fault status from each fan. Scheduled occupied and setback modes reduce unnecessary fan energy outside production periods. Branch segmentation keeps troubleshooting practical in large ceilings because a communication issue can be isolated without losing visibility of every cleanroom zone.
Ana Özellikler
Zone commands change multiple EC fan speed setpoints without editing every unit separately.
Returned speed, current and alarm states reveal stalled or disconnected FFUs quickly.
Segmented gateways support orderly expansion across multiple cleanroom ceiling grids.
Müşteri Ürün Sorunları
A large FFU ceiling needs centralized control without making a single branch fault difficult to diagnose or service.
Technicians cannot identify which fan in a dense ceiling grid has failed.Addressed status feedback links each alarm to a room coordinate and FFU number.
Manual speed adjustment creates inconsistent airflow across adjacent zones.Group setpoints apply a coordinated command to every selected FFU branch.
Full-speed operation during idle hours wastes fan energy.Scheduled occupied and setback commands reduce speed when process demand is lower.
One communication fault can obscure a large number of ceiling units.Multiple isolated branches and gateways limit the affected section and preserve the remaining network.
Tipik uygulamalar
Semiconductor cleanroom ceilingsPharmaceutical filling suitesElectronics assembly cleanroomsModular cleanroom installations
Teknik parametreler
Typical construction for an FFU group control cabinet serving networked EC fan filter units is listed below.
| Temel malzemeler | Powder-coated steel cabinet with FR-4 control boards, isolated RS-485 interfaces and copper terminals |
|---|---|
| Panel kalınlığı | 180-350 mm cabinet depth |
| Effective Width (Etkili Genişlik) | 500-1000 mm enclosure width |
| Maksimum uzunluk | Up to 1800 mm enclosure height |
| Çelik yüz yüze kalınlığı | 1.2-1.8 mm powder-coated steel panels |
| Core Density (Çekirdek Yoğunluğu) | 7800-8050 kg/m³ for steel enclosure components |
| Termal İletkenlik | 45-60 W/(m·K) for steel structural parts |
| Yüzey bitirme | Light-gray textured powder coat with blue HMI bezel and labeled branch indicators |
| Ortak tip | DIN-rail modular cabinet with segregated power and multi-branch Modbus terminal sections |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Modbus RTU or TCP gatewaysTouchscreen ceiling mapOccupied and setback schedulesRedundant communication branches
Planning a FFU Group Control System specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
