Complete FFU group control cabinet with blue touchscreen and fan network modules in three-quarter view

클린룸 제어 및 환경 모니터링 시스템 (Cleanroom Control and Environment Monitoring Systems)

FFU 그룹 제어 시스템

A networked controller that supervises large banks of fan filter units, distributes speed setpoints and identifies individual FFU faults from one operator panel.

Individual FFU Addressing
Grouped Speed Commands
Live Motor Feedback
Fault Location by Unit

견적 요청 제품 찾아보기

상품 소개

The FFU group control system connects individually addressed EC fan filter units through dedicated communication branches and industrial gateways. Operators can start, stop or change speed by room, zone or selected unit while receiving actual speed, current and fault status from each fan. Scheduled occupied and setback modes reduce unnecessary fan energy outside production periods. Branch segmentation keeps troubleshooting practical in large ceilings because a communication issue can be isolated without losing visibility of every cleanroom zone.

주요 기능

Addressable communication maps each fan filter unit to its physical ceiling location.

Zone commands change multiple EC fan speed setpoints without editing every unit separately.

Returned speed, current and alarm states reveal stalled or disconnected FFUs quickly.

Segmented gateways support orderly expansion across multiple cleanroom ceiling grids.

고객 제품 관심사

A large FFU ceiling needs centralized control without making a single branch fault difficult to diagnose or service.

Technicians cannot identify which fan in a dense ceiling grid has failed.Addressed status feedback links each alarm to a room coordinate and FFU number.

Manual speed adjustment creates inconsistent airflow across adjacent zones.Group setpoints apply a coordinated command to every selected FFU branch.

Full-speed operation during idle hours wastes fan energy.Scheduled occupied and setback commands reduce speed when process demand is lower.

One communication fault can obscure a large number of ceiling units.Multiple isolated branches and gateways limit the affected section and preserve the remaining network.

일반적인 응용 프로그램

반도체 클린룸 천장의약품 충전 제품군Electronics assembly cleanroomsModular cleanroom installations

기술 매개변수

Typical construction for an FFU group control cabinet serving networked EC fan filter units is listed below.

핵심 재료	Powder-coated steel cabinet with FR-4 control boards, isolated RS-485 interfaces and copper terminals
패널 두께	캐비닛 깊이 180 - 350 mm
유효 폭	500-1000 mm enclosure width
최대 길이	Up to 1800 mm enclosure height
강철 면면 두께	1. 2 - 1. 8 mm 분말 코팅 강철 패널
코어 밀도	7800 - 8050 kg / m 3 강철 엔클로저 구성요소
열전도도 (Thermal Conductivity)	45-60 W/(m·K) for steel structural parts
표면 마무리	Light-gray textured powder coat with blue HMI bezel and labeled branch indicators
접합 유형	DIN-rail modular cabinet with segregated power and multi-branch Modbus terminal sections
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Modbus RTU or TCP gatewaysTouchscreen ceiling mapOccupied and setback schedulesRedundant communication branches

Planning a FFU Group Control System specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.