Three-quarter view of a two-part epoxy repair compound cartridge, mixer and spatula

Temiz Oda Kurulum Aksesuarları

Epoxy Repair Compound (← bağlantılar | değiştir)

A two-component resin-and-hardener repair compound for rebuilding small damaged areas before sanding and hygienic surface finishing.

Metered Two-Part Mixing
Low-Shrink Hard Cure
Sandable Repair Surface
Multi-Substrate Bonding

Alıntı isteği Browse ürünleri

Ürün tanıtımı

Epoxy repair compound combines resin and hardener at a controlled ratio to form a dense thermoset repair material. Dual-cartridge packaging meters both components through a static mixer, reducing incomplete blending on small maintenance jobs. The mixed compound wets properly prepared metal, concrete and rigid panel surfaces, fills chips or localized voids and cures to a hard profile that can be shaped, sanded and overcoated with a compatible hygienic finish.

Ana Özellikler

Dual-barrel dispensing maintains the intended resin-to-hardener proportion for repeatable small repairs.

The static mixer produces a uniform blend without a separate mixing cup.

Low curing shrinkage helps the patch retain contact with sound repair edges.

The hardened surface can be machined or sanded before compatible topcoat application.

Müşteri Ürün Sorunları

A localized cleanroom repair must bond to a carefully prepared substrate and finish flush without leaving a porous or dirt-catching patch.

Hand-proportioned resin and hardener can remain soft when the ratio is inaccurate.Matched dual cartridges meter both components before they enter the static mixing element.

Oil, dust or weak coating prevents a repair from anchoring to the base material.The defect is cut back to sound material, degreased and mechanically keyed before application.

A proud or rough patch creates a ledge that is difficult to clean.The cured compound is shaped and sanded flush, then closed with a compatible smooth finish.

Large deep fills can overheat or cure unevenly during the exothermic reaction.Repair depth and batch size are limited to the selected grade, with deeper voids rebuilt in controlled stages.

Tipik uygulamalar

Cleanroom panel chip repairLocalized coated-metal defect fillingConcrete floor edge restorationEquipment base and curb repairsRigid frame and trim rebuilding

Teknik parametreler

Typical construction and application ranges for a cartridge-dispensed two-component epoxy repair compound are listed below.

Temel malzemeler	Two-component epoxy resin and amine hardener with mineral reinforcement
Panel kalınlığı	1-25 mm practical repair layer thickness
Effective Width (Etkili Genişlik)	5-100 mm typical localized repair width
Maksimum uzunluk	Up to 1000 mm continuous localized repair strip per application
Çelik yüz yüze kalınlığı	0.50-2.00 mm compatible steel repair substrate thickness
Core Density (Çekirdek Yoğunluğu)	Approximately 1400-2000 kg/m³ mixed compound density
Termal İletkenlik	Approximately 0.30-0.80 W/(m·K) for cured filled epoxy
Yüzey bitirme	Dense sandable gray or off-white surface suitable for compatible overcoating
Ortak tip	Bonded chip, crack, edge or shallow-void repair on sound prepared substrate
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Dual cartridge or hand-mix packFast or extended working timeGray or off-white compoundStatic mixer and application spatula kit

Planning a Epoxy Repair Compound specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun