Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Accesorios de instalación de sala limpia
Compuesto de reparación epoxi
A two-component resin-and-hardener repair compound for rebuilding small damaged areas before sanding and hygienic surface finishing.
- Metered Two-Part Mixing
- Low-Shrink Hard Cure
- Sandable Repair Surface
- Multi-Substrate Bonding
Introducción del producto
Epoxy repair compound combines resin and hardener at a controlled ratio to form a dense thermoset repair material. Dual-cartridge packaging meters both components through a static mixer, reducing incomplete blending on small maintenance jobs. The mixed compound wets properly prepared metal, concrete and rigid panel surfaces, fills chips or localized voids and cures to a hard profile that can be shaped, sanded and overcoated with a compatible hygienic finish.
Características clave
The static mixer produces a uniform blend without a separate mixing cup.
Low curing shrinkage helps the patch retain contact with sound repair edges.
The hardened surface can be machined or sanded before compatible topcoat application.
Preocupaciones del producto del cliente
A localized cleanroom repair must bond to a carefully prepared substrate and finish flush without leaving a porous or dirt-catching patch.
Hand-proportioned resin and hardener can remain soft when the ratio is inaccurate.Matched dual cartridges meter both components before they enter the static mixing element.
Oil, dust or weak coating prevents a repair from anchoring to the base material.The defect is cut back to sound material, degreased and mechanically keyed before application.
A proud or rough patch creates a ledge that is difficult to clean.The cured compound is shaped and sanded flush, then closed with a compatible smooth finish.
Large deep fills can overheat or cure unevenly during the exothermic reaction.Repair depth and batch size are limited to the selected grade, with deeper voids rebuilt in controlled stages.
Aplicaciones típicas
Cleanroom panel chip repairLocalized coated-metal defect fillingConcrete floor edge restorationEquipment base and curb repairsRigid frame and trim rebuilding
Parámetros técnicos
Typical construction and application ranges for a cartridge-dispensed two-component epoxy repair compound are listed below.
| Materiales Core | Two-component epoxy resin and amine hardener with mineral reinforcement |
|---|---|
| Panel de espesor | 1-25 mm practical repair layer thickness |
| Ancho efectivo | 5-100 mm typical localized repair width |
| Longitud máxima | Up to 1000 mm continuous localized repair strip per application |
| Acero frente a espesor | 0.50-2.00 mm compatible steel repair substrate thickness |
| Densidad Core | Approximately 1400-2000 kg/m³ mixed compound density |
| Conductividad térmica | Approximately 0.30-0.80 W/(m·K) for cured filled epoxy |
| Superficie acabada | Dense sandable gray or off-white surface suitable for compatible overcoating |
| Tipo conjunto | Bonded chip, crack, edge or shallow-void repair on sound prepared substrate |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Dual cartridge or hand-mix packFast or extended working timeGray or off-white compoundStatic mixer and application spatula kit
Planning a Epoxy Repair Compound specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
