Silver die-cast aluminum raised floor panel above four complete pedestals

Temiz Oda zemin sistemleri

Die-Cast Alüminyum Yüksek Erişim Zemin

A precision die-cast aluminum access-floor panel with orthotropic underside ribs for corrosion-resistant, non-magnetic cleanroom and technical-area installations.

Monolithic Die-Cast Aluminum
Non-Magnetic Construction
Corrosion-Resistant Panel
High Stiffness at Low Weight

Alıntı isteği Browse ürünleri

Ürün tanıtımı

Die-cast aluminum raised access flooring uses a one-piece panel with an orthotropic underside rib pattern that directs material where bending stiffness is needed. The corrosion-resistant, non-magnetic carrier panel is accurately manufactured for repeatable alignment on a 600 mm pedestal grid. Its open ribbed underside leaves space for service distribution and reduces panel weight compared with a solid slab. The top can remain coated aluminum or accept cleanroom PVC and conductive finishes, while each module can be removed to reach the plenum below.

Ana Özellikler

The one-piece aluminum casting avoids welded seams within the carrier panel and resists corrosion in controlled environments.

Orthotropic ribs provide high load capacity with controlled deflection while limiting unnecessary panel mass.

Non-magnetic aluminum is suitable around processes and instruments that restrict ferrous floor construction.

Conductive powder coating or resilient cleanroom covering can be bonded to the accurately machined top surface.

Müşteri Ürün Sorunları

Cleanroom access flooring must combine frequent panel removal with corrosion resistance, tight fit and low particle-generating movement.

Paint damage exposes conventional steel panels to corrosion in humid service voids.The carrier panel is a corrosion-resistant aluminum casting rather than a painted carbon-steel shell.

Heavy solid panels slow maintenance and increase handling risk during access.The ribbed orthotropic design removes non-working material while retaining structural stiffness.

Ferrous floor components interfere with magnetically sensitive instruments.The principal panel body is non-magnetic aluminum, with understructure materials selected separately for the room.

Inconsistent panel dimensions create rocking edges and dirt-trapping height differences.Precision casting and machining provide repeatable corner geometry across the modular grid.

Tipik uygulamalar

Semiconductor cleanroomsPrecision metrology roomsPharmaceutical clean manufacturing suitesMedical-device controlled areasHigh-specification technical rooms

Teknik parametreler

Typical values for a high-load die-cast aluminum raised-floor panel are listed below.

Temel malzemeler	One-piece die-cast aluminum alloy with orthotropic underside reinforcing ribs
Panel kalınlığı	52–60 mm overall structural panel depth
Effective Width (Etkili Genişlik)	600 mm nominal pedestal-grid width
Maksimum uzunluk	600 mm nominal modular panel length
Çelik yüz yüze kalınlığı	0 mm; the monolithic aluminum carrier has no steel facing
Core Density (Çekirdek Yoğunluğu)	Approximately 2700 kg/m³ for the die-cast aluminum alloy
Termal İletkenlik	Approximately 130–180 W/(m·K) for common die-cast aluminum alloys
Yüzey bitirme	Conductive or non-conductive powder coating, with optional bonded cleanroom PVC
Ortak tip	Precision removable panels located on gasketed pedestal heads in a 600 mm grid
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Conductive or standard powder-coated surfaceBonded cleanroom PVC finishSolid or drilled ventilation configurationPedestal heights from approximately 50–2000 mm

Planning a Die-Cast Aluminum Raised Access Floor specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun