Silver die-cast aluminum raised floor panel above four complete pedestals

Cleanroom Flooring Sistem

Die-Cast Aluminium Angkat Lantai Akses

A precision die-cast aluminum access-floor panel with orthotropic underside ribs for corrosion-resistant, non-magnetic cleanroom and technical-area installations.

Monolithic Die-Cast Aluminum
Non-Magnetic Construction
Corrosion-Resistant Panel
High Stiffness at Low Weight

Permintaan untuk kutipan Browse Produk

Perkenalan produk

Die-cast aluminum raised access flooring uses a one-piece panel with an orthotropic underside rib pattern that directs material where bending stiffness is needed. The corrosion-resistant, non-magnetic carrier panel is accurately manufactured for repeatable alignment on a 600 mm pedestal grid. Its open ribbed underside leaves space for service distribution and reduces panel weight compared with a solid slab. The top can remain coated aluminum or accept cleanroom PVC and conductive finishes, while each module can be removed to reach the plenum below.

Fitur utama:

The one-piece aluminum casting avoids welded seams within the carrier panel and resists corrosion in controlled environments.

Orthotropic ribs provide high load capacity with controlled deflection while limiting unnecessary panel mass.

Non-magnetic aluminum is suitable around processes and instruments that restrict ferrous floor construction.

Conductive powder coating or resilient cleanroom covering can be bonded to the accurately machined top surface.

Kekhawatiran produk pelanggan

Cleanroom access flooring must combine frequent panel removal with corrosion resistance, tight fit and low particle-generating movement.

Paint damage exposes conventional steel panels to corrosion in humid service voids.The carrier panel is a corrosion-resistant aluminum casting rather than a painted carbon-steel shell.

Heavy solid panels slow maintenance and increase handling risk during access.The ribbed orthotropic design removes non-working material while retaining structural stiffness.

Ferrous floor components interfere with magnetically sensitive instruments.The principal panel body is non-magnetic aluminum, with understructure materials selected separately for the room.

Inconsistent panel dimensions create rocking edges and dirt-trapping height differences.Precision casting and machining provide repeatable corner geometry across the modular grid.

Aplikasi yang Tipis

Semiconductor cleanroomsPrecision metrology roomsPharmaceutical clean manufacturing suitesMedical-device controlled areasHigh-specification technical rooms

Parameter teknis

Typical values for a high-load die-cast aluminum raised-floor panel are listed below.

Bahan inti	One-piece die-cast aluminum alloy with orthotropic underside reinforcing ribs
Ketebalan Panel (Panel Thickness)	52–60 mm overall structural panel depth
Efektif lebar	600 mm nominal pedestal-grid width
Panjang maksimum	600 mm nominal modular panel length
Baja menghadap ketebalan	0 mm; the monolithic aluminum carrier has no steel facing
Kepadatan inti (core density)	Approximately 2700 kg/m³ for the die-cast aluminum alloy
Konduktivitas Termal (Thermal Conductivity)	Approximately 130–180 W/(m·K) for common die-cast aluminum alloys
Permukaan selesai	Conductive or non-conductive powder coating, with optional bonded cleanroom PVC
Jenis Bersama	Precision removable panels located on gasketed pedestal heads in a 600 mm grid
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Conductive or standard powder-coated surfaceBonded cleanroom PVC finishSolid or drilled ventilation configurationPedestal heights from approximately 50–2000 mm

Planning a Die-Cast Aluminum Raised Access Floor specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami