Silver die-cast aluminum raised floor panel above four complete pedestals

클린룸 바닥 시스템

다이 캐스트 알루미늄 상승 액세스 바닥

A precision die-cast aluminum access-floor panel with orthotropic underside ribs for corrosion-resistant, non-magnetic cleanroom and technical-area installations.

Monolithic Die-Cast Aluminum
Non-Magnetic Construction
Corrosion-Resistant Panel
High Stiffness at Low Weight

견적 요청 제품 찾아보기

상품 소개

Die-cast aluminum raised access flooring uses a one-piece panel with an orthotropic underside rib pattern that directs material where bending stiffness is needed. The corrosion-resistant, non-magnetic carrier panel is accurately manufactured for repeatable alignment on a 600 mm pedestal grid. Its open ribbed underside leaves space for service distribution and reduces panel weight compared with a solid slab. The top can remain coated aluminum or accept cleanroom PVC and conductive finishes, while each module can be removed to reach the plenum below.

주요 기능

The one-piece aluminum casting avoids welded seams within the carrier panel and resists corrosion in controlled environments.

Orthotropic ribs provide high load capacity with controlled deflection while limiting unnecessary panel mass.

Non-magnetic aluminum is suitable around processes and instruments that restrict ferrous floor construction.

Conductive powder coating or resilient cleanroom covering can be bonded to the accurately machined top surface.

고객 제품 관심사

Cleanroom access flooring must combine frequent panel removal with corrosion resistance, tight fit and low particle-generating movement.

Paint damage exposes conventional steel panels to corrosion in humid service voids.The carrier panel is a corrosion-resistant aluminum casting rather than a painted carbon-steel shell.

Heavy solid panels slow maintenance and increase handling risk during access.The ribbed orthotropic design removes non-working material while retaining structural stiffness.

Ferrous floor components interfere with magnetically sensitive instruments.The principal panel body is non-magnetic aluminum, with understructure materials selected separately for the room.

Inconsistent panel dimensions create rocking edges and dirt-trapping height differences.Precision casting and machining provide repeatable corner geometry across the modular grid.

일반적인 응용 프로그램

Semiconductor cleanroomsPrecision metrology roomsPharmaceutical clean manufacturing suitesMedical-device controlled areasHigh-specification technical rooms

기술 매개변수

Typical values for a high-load die-cast aluminum raised-floor panel are listed below.

핵심 재료	One-piece die-cast aluminum alloy with orthotropic underside reinforcing ribs
패널 두께	52–60 mm overall structural panel depth
유효 폭	600 mm nominal pedestal-grid width
최대 길이	600 mm nominal modular panel length
강철 면면 두께	0 mm; the monolithic aluminum carrier has no steel facing
코어 밀도	Approximately 2700 kg/m³ for the die-cast aluminum alloy
열전도도 (Thermal Conductivity)	Approximately 130–180 W/(m·K) for common die-cast aluminum alloys
표면 마무리	Conductive or non-conductive powder coating, with optional bonded cleanroom PVC
접합 유형	Precision removable panels located on gasketed pedestal heads in a 600 mm grid
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Conductive or standard powder-coated surfaceBonded cleanroom PVC finishSolid or drilled ventilation configurationPedestal heights from approximately 50–2000 mm

Planning a Die-Cast Aluminum Raised Access Floor specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.